- Voltage at idle? ('93 E150 4.9 EFI)
- Help me figure out what I have here (Carb issue)
- Offenhauser DP and fuel injection
- Spread Bore Carb Orientation
- It's Time To Pull The EEC IV.
- Weber 32/36, or 2100
- Why Block-off Instead of Remove EGR?
- Saginaw pump conversion- I 6 300....
- 300 straight 6 has only 27 psi oil pressure
- Carb kit compatible with todays gas???
- $500 f250 4.9l and zf5 4wd questions
- HEI Distributor
- HELP!!!!! Ford 300 missing and backfiring.
- Ignition control questions
- 4.9 oil leaking from flywheel bolt holes
- HEI or Duraspark 2 Conversion 85 F150 4.9L
- HEI DISTRIBUTOR WITH FORD EFI
- tiny bit of oil in coolant tiny bit of fresh rust scaling on dip stick
- Ford 300 has a very hard time starting when hot
- Engine code
- Short whining at idle and turn off
- Spout/timing problems
- Carburetor advice for a 1960 223 I6?
- Quadrajet on a 300
- Burning up Ignition Coils
- 96 4.9 Computer/electrical problems
- 88 f150 random misfire
- Just got spark but no start
- 300 Sputters and Dies
- Start Up Rattle