- Decoding Engine Cast
- 351W cold run issues
- Spark Plug Reach
- E303 Cam with gt40p heads and 1.7 RR
- 302-T19 Hydraulic clutch options
- Block assembly prep - flash, burrs, core plugs, galley plugs...?
- 1989 302 Comp 35-512-8 budget swap
- Zero Oil Pressure 351W
- Need help with valve springs
- Injector impedance, School Me
- 351w engine dies with light throttle, can rev thru "dead zone"
- Valve / seat ware
- Please help me identify my Power Valve (Motorcraft 2150)
- Back from the machine shop...How to check their work?
- 5.0/302 EFI hard starting
- Hydraulic Camshaft Advice for my 351w with AFR 185cc heads
- 408 Cam upgrade: weighing my options
- High Altitude Jets for 2150 351W? Running rich
- seeking tips for Loosening the distributor on a 1989 302
- 351W EFI wiring
- Spark Wire Boot Corrosion And Engine Health
- Stroker questions
- High Capacity Oil Pan Options for 91' 408
- 351W Rebuild from '93 Bronco - Cam specs
- Early vs late 351W questions?
- Suggestions for engine / trans swap --302 upgrade
- Stock ECU w/ heads/camp upgrade.
- Turbocharged 351W vs 302W
- 96' 351W 4WD E4OD Running Out of Options Save Ethel!
- Swapping an Explorer EFI into a 94 Bronco