Dad's Engine

Reply Subscribe

Thread Tools

Search this Thread

Jun 4, 2014 | 06:39 PM

#946

FordFETruck

Logistics Pro

Joined: Sep 2011

Posts: 4,491

Likes: 26

From: Algona,WA

is that just a reflection on the 9:00-12:00 area of the flywheel or are those chatter marks or what?

Jun 4, 2014 | 06:44 PM

#947

ArdWrknTrk

pedant

Joined: Jan 2008

Posts: 23,576

Likes: 39

From: EXTREME southwest CT

Edit: now I see what you mean.
It looks like patter on the disc.
My screen is too small to look closely.

That's what a freshly blanchard ground flywheel should look like.

https://www.google.com/search?q=blan...ih=546&dpr=0.9

Jun 4, 2014 | 09:30 PM

#948

Gary Lewis

Thread Starter

FTE Legend

Joined: Jul 2010

Posts: 32,875

Likes: 48

From: Northeast, OK

I saw that area as well and don't know what it is. A reflection off the ceiling? Something wrong with the flywheel? I just don't know.

Anyway, I'm going to ask my machine shop if they can grind the flywheel and put a new ring gear on it. Good as new.

Jun 4, 2014 | 09:56 PM

#949

Rogue_Wulff

Post Fiend

Joined: Dec 2007

Posts: 8,521

Likes: 16

From: Lost

Installing ring gear is piece of cake. Heat oven to 500, place ring gear inside and bake for 10 minutes. Use good oven mitts to pull it out and set it in place on the flywheel. Wait a few minutes, and done.

Jun 4, 2014 | 10:06 PM

#950

Gary Lewis

Thread Starter

FTE Legend

Joined: Jul 2010

Posts: 32,875

Likes: 48

From: Northeast, OK

Yup. And I have the oven. But if they do it as part of the resurfacing that's one less thing I have to do. Do you know if Stanley grinds flywheels?

Jun 4, 2014 | 10:12 PM

#951

Rogue_Wulff

Post Fiend

Joined: Dec 2007

Posts: 8,521

Likes: 16

From: Lost

No idea. We send them to the local orielly, they have a good machine, and at least 1 or 2 people that actually know how to use it.......
Stanley is a bit too far for something like this.....

Jun 4, 2014 | 10:19 PM

#952

Gary Lewis

Thread Starter

FTE Legend

Joined: Jul 2010

Posts: 32,875

Likes: 48

From: Northeast, OK

I will check with Ron at this O'Reilly's then. Just want to have it done before they balance everything. Tim says the whole kit comes in here on Friday, including:

Pistons
Rings
Intake
Carb
Bearings
Gaskets
ARP fasteners for heads, mains, and rods - inc one for the oil pump pickup
Oil pump & shaft
Balancer
Roller rockers
Roller lifters
Pushrods

Should be FUN opening those boxes up!

Jun 5, 2014 | 08:08 AM

#953

lavatan

Laughing Gas

Joined: Oct 2010

Posts: 997

Likes: 2

From: Rock Valley, IA

Quote:

Originally Posted by Gary Lewis

I will check with Ron at this O'Reilly's then. Just want to have it done before they balance everything. Tim says the whole kit comes in here on Friday, including:

Pistons
Rings
Intake
Carb
Bearings
Gaskets
ARP fasteners for heads, mains, and rods - inc one for the oil pump pickup
Oil pump & shaft
Balancer
Roller rockers
Roller lifters
Pushrods

Should be FUN opening those boxes up!

Can't wait to see the products. Maybe we'll see the finished product by Christmas.

FTE Stories

Ford Trucks for Ford Truck Enthusiasts

10 Things Every Truck Owner NEEDS (2026 Edition)

Michael S. Palmer

Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath

Verdad Gallardo

Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer

Joe Kucinski

2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)

Brett Foote

Top 10 Ford Truck Tragedies

Joe Kucinski

AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make

Brett Foote

Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!

Michael S. Palmer

Ford's 2001 Explorer Sportsman Concept Looks For a New Home

Verdad Gallardo

10 Best Ford Truck Engines We Miss the Most!

Joe Kucinski

2026 Shelby F-150 Off-Road: Better Than a Raptor R?

Brett Foote

Jun 5, 2014 | 10:34 AM

#954

Gary Lewis

Thread Starter

FTE Legend

Joined: Jul 2010

Posts: 32,875

Likes: 48

From: Northeast, OK

If, by "finished product" you mean the engine, then I would hope to have it done and dyno'd by then. But, if you meant the whole truck I seriously doubt it.