O/t!!!
Postmaster
Joined: Sep 2004
Posts: 3,916
Likes: 0
From: Bellingham, WA
Anything that has a board involved, usually gets my attention. If you try snowboarding, remember they dont call us "knuckle draggers" for nothing! One thing no matter how hard I try I cant master the skate board. Weird huh? Surf board, wake board, snow board, knee board...All good. Must be the wheels.
Lead Driver
Joined: May 2007
Posts: 5,613
Likes: 9
From: Flagstaff, Arizona
I started waterskiing when I was 3 yrs old, grew up 15 miles from a ski-resort and for some weird reason I never once tried snow skiing, I was instantly attracted to Snowboarding once it came on the scene.....I think it was around 85' when I first tried it. Burton Woody was my first board, no metal edges! I'd kill to have that on the wall now....collectors item.
Postmaster
Joined: May 2008
Posts: 3,099
Likes: 0
From: horicon Wi
Hey everybody. I got a question that I want your opinions on.
Say you are driving a 130hp tractor
like this pulling a wagon full of feed and you are almost at an intersection but someone flys right by you and nails their breakes to stop for the intersection, would you either A. slam on your brakes, B. ram his *** and say you didn't see him, or C. nail your breakes and get right up on his *** and slowly at first push him out of your way faster and faster? I would ram his ***.
Say you are driving a 130hp tractor
like this pulling a wagon full of feed and you are almost at an intersection but someone flys right by you and nails their breakes to stop for the intersection, would you either A. slam on your brakes, B. ram his *** and say you didn't see him, or C. nail your breakes and get right up on his *** and slowly at first push him out of your way faster and faster? I would ram his ***.
Lead Driver
Joined: May 2007
Posts: 5,613
Likes: 9
From: Flagstaff, Arizona
Jacob.....there are a LOT of really stupid and careless drivers in this world. If we all acted on our gut reactions on things that happen in traffic, none of us would have drivers licenses lol Frustrating yea......but not worth smashing the guy up over! Cool tractor
Postmaster
Joined: May 2008
Posts: 3,099
Likes: 0
From: horicon Wi
This happened to my friend not me, other wise you would hear a story about how I smashed some DA's car.
Me and my dad love driving near Milwaukee with farm equipment
because Mon. through Fri. they will run you over but Sat. and Sun. They are soooo ****ing SLOW!!!
I would love to have that tractor. It's got a Diesel it's Turboed and can be P-Pumped
Me and my dad love driving near Milwaukee with farm equipment because Mon. through Fri. they will run you over but Sat. and Sun. They are soooo ****ing SLOW!!! I would love to have that tractor. It's got a Diesel it's Turboed and can be P-Pumped
Postmaster
Joined: May 2008
Posts: 3,099
Likes: 0
From: horicon Wi
Post Fiend
Joined: Sep 2006
Posts: 5,584
Likes: 0
From: Millbrook Alabama
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Postmaster
Joined: May 2008
Posts: 3,099
Likes: 0
From: horicon Wi
Gone, but not forgotten
Joined: Oct 2005
Posts: 5,026
Likes: 2
From: Charlotte-Fairbanks-Bflo
Sure, this sounds like fun. But it would just get your *** landed in jail, or worse yet the clown may have a gun and just choose to shoot you dead. I did beat a motor cycle ride half to death once with his own helmet though. I guess I was not going fast enough for him so when he blew by me he was dumb enough to give me the finger as he did. Then he had the misfortune of catching the next light. I just put my truck in park, sort of jogged up to his bike grabbed his *** by the back of his helmet, as he came off the bike, of course the bike landed on its side his helmet ended up in my hand and I left him good and bloody right there in the intersection. Calmly got in my truck and drove around the mess I had just created and got a lot of thumbs ups from observers. I think he probably gave up flipping the bird to other drivers.
Posting Guru
Joined: Oct 2007
Posts: 2,225
Likes: 1
From: Farmington, Minnesota
Good afternoon everyone, it was raining here today so that put the ca bash on my work day. 
So after some thought of what I was going to do with my day. I decided to finish installing the drinking water filtration unit that has been collecting dust at my house. This is so OT, so I figured what better place.
I tapped into the existing fitting for the ice maker for a supply to the filter unit, then ran a line to the drinking faucet in the kitchen and also teed into that same line to re-hook up the ice maker.
The only similarity to a PSD would be some of the connections I used to attach all the lines. Very simular to some of the fuel line connections.
Before I decided to tackle that I put some new rubber on the truck also
The BFG were done at 25K
I ran them another 8k, but winter is coming and I would be screwed with those POS on.
So after some thought of what I was going to do with my day. I decided to finish installing the drinking water filtration unit that has been collecting dust at my house. This is so OT, so I figured what better place.
I tapped into the existing fitting for the ice maker for a supply to the filter unit, then ran a line to the drinking faucet in the kitchen and also teed into that same line to re-hook up the ice maker.
The only similarity to a PSD would be some of the connections I used to attach all the lines. Very simular to some of the fuel line connections.
Before I decided to tackle that I put some new rubber on the truck also
The BFG were done at 25K
I ran them another 8k, but winter is coming and I would be screwed with those POS on.
Postmaster
Joined: May 2008
Posts: 3,099
Likes: 0
From: horicon Wi
I asked my dad and he said it IS NOT illegal if some DA whips right around you right before an intersection to hit him if you are in a tractor that would be called Short Stopping. I am definatley letting my friend know about this.
Postmaster
Joined: Sep 2004
Posts: 3,916
Likes: 0
From: Bellingham, WA
Sure, this sounds like fun. But it would just get your *** landed in jail, or worse yet the clown may have a gun and just choose to shoot you dead. I did beat a motor cycle ride half to death once with his own helmet though. I guess I was not going fast enough for him so when he blew by me he was dumb enough to give me the finger as he did. Then he had the misfortune of catching the next light. I just put my truck in park, sort of jogged up to his bike grabbed his *** by the back of his helmet, as he came off the bike, of course the bike landed on its side his helmet ended up in my hand and I left him good and bloody right there in the intersection. Calmly got in my truck and drove around the mess I had just created and got a lot of thumbs ups from observers. I think he probably gave up flipping the bird to other drivers.
Just kidding man
Not a liberal...
Joined: Jul 2006
Posts: 6,635
Likes: 4
From: Cut & Shoot, Texas
Susan saw this from her 17th floor office in The Woodlands today:
Pilot and photographer killed in SkyEye crash in Montgomery County - 10/13/08 - Houston News - abc13.com
Pilot and photographer killed in SkyEye crash in Montgomery County - 10/13/08 - Houston News - abc13.com
Postmaster
Joined: Sep 2004
Posts: 3,916
Likes: 0
From: Bellingham, WA
Susan saw this from her 17th floor office in The Woodlands today:
Pilot and photographer killed in SkyEye crash in Montgomery County - 10/13/08 - Houston News - abc13.com
Pilot and photographer killed in SkyEye crash in Montgomery County - 10/13/08 - Houston News - abc13.com