JANUARY early thread!
Moderator & parts slinger
Joined: Feb 2007
Posts: 50,269
Likes: 5,822
From: S/W Missouri, Polk county
Alan I will be back in Missouri tues evening, and an pretty sure I have 2 sets of 460 exhaust manifolds settting on the work bench.
If not I have a set on the 460 in the maroon parts truck......and the 2 spare 460's setting around each have a set, so I am sure I have you covered.
And they are all easy to reach......
RC good on you to make a new friend, people need interaction with the opposite gender, its good for the soul.
If not I have a set on the 460 in the maroon parts truck......and the 2 spare 460's setting around each have a set, so I am sure I have you covered.
And they are all easy to reach......
RC good on you to make a new friend, people need interaction with the opposite gender, its good for the soul.
Hotshot
Joined: Jan 2011
Posts: 13,150
Likes: 348
From: THIS IS SPARTA!, ...Mo.
Guys, y'all gotta give me a chance to catch up. I'm about a week and a half behind. Actually a little more than that.
I'll be more than happy to do everything, but I HAVE to get caught up here. I have trucks parked out back that need work, I have trucks out front that need work, .....I'm just swamped here.
Rich, I'm gonna get a good look at this manifold Bob dropped off and see if it'll work. He had the one off his 429. If I can make it work, that truck is outta here. Then on to the Bravada engine.
I'll be more than happy to do everything, but I HAVE to get caught up here. I have trucks parked out back that need work, I have trucks out front that need work, .....I'm just swamped here.
Rich, I'm gonna get a good look at this manifold Bob dropped off and see if it'll work. He had the one off his 429. If I can make it work, that truck is outta here. Then on to the Bravada engine.
Posting Guru
Joined: Dec 2010
Posts: 1,429
Likes: 0
Start out slow and do short distances after a good warm up and stretch. And stretch after the run to cool down and slow blood flow down.
If you are running along had and sudden stop or push to the end and the hit the brakes the blood can pool in your feet and you can pass out.
Step up the distances a little at a time 1/2 , 1 mile, then 1.5, then 2.
If you are running along had and sudden stop or push to the end and the hit the brakes the blood can pool in your feet and you can pass out.
Step up the distances a little at a time 1/2 , 1 mile, then 1.5, then 2.
Moderator & parts slinger
Joined: Feb 2007
Posts: 50,269
Likes: 5,822
From: S/W Missouri, Polk county
Stretch, warm up, get the blood flowing and 1/2 walk/run 1/4 and then turn around and run back. Its a crawl walk run mentality.......its not fun but healthy for you.
Lead Driver
Joined: Jan 2011
Posts: 9,858
Likes: 254
From: missouri
good morning missouri...... i dont think i will work today, just take a few things to town for ups to ship off. then off to arkansas...
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Hotshot
Joined: Jan 2011
Posts: 13,150
Likes: 348
From: THIS IS SPARTA!, ...Mo.
Good Morning Everybody!
Brian, do what Rich says. I like to do a cool down walk afterwards too, along with a cool down stretch.
Ches, I gotta lay eyes on the Bronco before I can give you a number. Don't worry, I'll help you out.
RC, have fun down in Arkansas. (just don't get arrested) Seriously though, I'm glad you found somebody to spend your time with. I'm very happy for you.
Coffee's done brewing, I think I'll get a cup.
Brian, do what Rich says. I like to do a cool down walk afterwards too, along with a cool down stretch.
Ches, I gotta lay eyes on the Bronco before I can give you a number. Don't worry, I'll help you out.
RC, have fun down in Arkansas. (just don't get arrested)
Seriously though, I'm glad you found somebody to spend your time with. I'm very happy for you.Coffee's done brewing, I think I'll get a cup.
Lead Driver
Joined: Aug 2009
Posts: 7,580
Likes: 250
From: Laquey, MO
Good Morning all - it looks like a pretty good day shaping up out there.
I've got the day off, but that doesn't mean much as I have a lot to get done today. I'm going to stop by a local scrap yard this afternoon and run a few more errands, but the bulk that needs to be done is around here.
I've got the day off, but that doesn't mean much as I have a lot to get done today. I'm going to stop by a local scrap yard this afternoon and run a few more errands, but the bulk that needs to be done is around here.
Moderator & parts slinger
Joined: Feb 2007
Posts: 50,269
Likes: 5,822
From: S/W Missouri, Polk county
Morning to all doing a finial pack of the bag one to come home with for a few days and one to come back and pick up to take over the pond next week.
Dave you and your shoulder and the chain saw better take it easy......
Dave you and your shoulder and the chain saw better take it easy......
Post Fiend
Joined: Dec 2006
Posts: 9,111
Likes: 3
From: Lexington Mo
Borderbum, if you have a vacuum gauge, put it on the vacuum hose that comes off of the back of the intake manifold and goes to the brake booster. that gauge will tell you if you have a bad valve. That needle is going to go crazy! It will also tell you if you have a timing problem etc. Every 400 I've had was also good about the rockers backing off, then the valves aren't opening completely! I'd start with that gauge! Just a thought!
Unk Bob
Unk Bob
Post Fiend
Joined: Dec 2006
Posts: 9,111
Likes: 3
From: Lexington Mo
Really thinking about getting those running boards on the 01 today. Sure wish the wind would mellow out. Atleast it isn't cold out, like it is supposed to be tomorrow.
No way I can do a project like that in the wussy garage we have here. Some day I'll live in the boony's and have me a nice shop I can put Ka'Bluey, the 01 and my tools in and just hide
.
Unk Bob
No way I can do a project like that in the wussy garage we have here. Some day I'll live in the boony's and have me a nice shop I can put Ka'Bluey, the 01 and my tools in and just hide
.Unk Bob
Lead Driver
Joined: Jan 2011
Posts: 9,858
Likes: 254
From: missouri
sounds good bob..a big shop is nice..one day i am going to get bigger shop.. this dinky thing here after ya get a couple of cars and a bus in it, is just too small...i am thinking a 100x200 shop..might be the size i need....
Lead Driver
Joined: Jan 2011
Posts: 9,858
Likes: 254
From: missouri
i need a grille shell for a 35 ford ..any of you guys have one laying around your not using... i am stuck with deciding what engine to use.. i like the old 42 flathead i have ..but i also have a couple of nailheads that are real torque monsters.. the straight 8 buick in that 53 would be cool looking, but to have something different i thought about the packard V/8 sitting out back would have em guessing at the shows.. i am getting excited thinking about a new project..