... but while wearing combat boots a bit gawky looking...
JANUARY early thread!
Lead Driver
Joined: Jan 2011
Posts: 9,856
Likes: 254
From: missouri
oh yea alan..i went to get that manifold and that truck had the wrong head off already...
... the passenger side was still complete.. but there is another dent with the 351-400 that has the passenger head off just connected at the pipe.. i seem to remember that the 400 and 460 share alot of parts but dont really know if the manifolds are the same.. do you know for sure if they are before i take one off of it... i hate work!!!!
... the passenger side was still complete.. but there is another dent with the 351-400 that has the passenger head off just connected at the pipe.. i seem to remember that the 400 and 460 share alot of parts but dont really know if the manifolds are the same.. do you know for sure if they are before i take one off of it... i hate work!!!!
Moderator & parts slinger
Joined: Feb 2007
Posts: 50,158
Likes: 5,786
From: S/W Missouri, Polk county
I am not to sure about a 400 and 460 exhaust manifold being interchangeable? I know that a car 460 exhaust manifold will fit a truck, but the passenger manifold will hit the frame rail.
Most folks notch the frame (bad decision) when a car 460 is put in a truck. So you have to have a specific truck application manifold on the passenger side for sure.
The truck one is a little longer and closer to the eng block to clear the frame. I think I have a set or 2 Alan? If I get home this coming week can help you out if you need a set?
RC as far as off for today yes and hopefully all next week.......
Most folks notch the frame (bad decision) when a car 460 is put in a truck. So you have to have a specific truck application manifold on the passenger side for sure.
The truck one is a little longer and closer to the eng block to clear the frame. I think I have a set or 2 Alan? If I get home this coming week can help you out if you need a set?
RC as far as off for today yes and hopefully all next week.......
Hotshot
Joined: Jan 2011
Posts: 13,131
Likes: 347
From: THIS IS SPARTA!, ...Mo.
RC, I'm pretty sure they are NOT the same.
Rich, if you could, man that would help me out. I want to get this thing done and gone.
I have to clean the shop and re-arrange some stuff today. I'll probably get on the Bravada engine bright and early tomorrow.
Oh and Rich, yes, if you need tires swapped around, it's here. That goes for anyone reading this that knows where I live. (all I ask is that you don't get nutty with it.)
Rich, if you could, man that would help me out. I want to get this thing done and gone.
I have to clean the shop and re-arrange some stuff today. I'll probably get on the Bravada engine bright and early tomorrow.
Oh and Rich, yes, if you need tires swapped around, it's here. That goes for anyone reading this that knows where I live. (all I ask is that you don't get nutty with it.)
Postmaster
Joined: Jan 2005
Posts: 3,876
Likes: 0
From: Hollister MO
400, and 460 Are not the same! I over slept for church! looks like bacon and eggs then head in to work at 11,
The mpg's in the bronco have got to suck! I drove it 3 days this week and used 1/2tank of gas!
The mpg's in the bronco have got to suck! I drove it 3 days this week and used 1/2tank of gas!
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Post Fiend
Joined: Dec 2006
Posts: 9,111
Likes: 3
From: Lexington Mo
Whazzupp Y'all!!!
Alan I missed it someplace, but what are you looking for
. I've ben through a few 400's with Ka'Bluey. Not sure what I have still. Let me know and I will look. I'm taking off the front trim piece on the 01 today and fixing a flashing light. Thr truck has an aftermarket alarm, with remote starter (realy like that thing) and when the alarm is set there is/was a flashing led light. The shop that I had install this thing didn't leave any wire to spare, so as soon as I pulled that trim off to get to the stereo. I also tore the two wires there. I like it, it acts like a deterant to show that "This thing is wired". I've had a vehicle stolen, one hit buy a stolen car, the driver bailed in a police chase, and that vehilce hit my old Cutlass I had then and knocked it in my front yard, was parked along the road. I've had another 79 F150 Custom that I bought almost new broken into. Stole everything that was in there... So I'll take anything that I can get. WHEW!
Unk Bob
Alan I missed it someplace, but what are you looking for
. I've ben through a few 400's with Ka'Bluey. Not sure what I have still. Let me know and I will look. I'm taking off the front trim piece on the 01 today and fixing a flashing light. Thr truck has an aftermarket alarm, with remote starter (realy like that thing) and when the alarm is set there is/was a flashing led light. The shop that I had install this thing didn't leave any wire to spare, so as soon as I pulled that trim off to get to the stereo. I also tore the two wires there. I like it, it acts like a deterant to show that "This thing is wired". I've had a vehicle stolen, one hit buy a stolen car, the driver bailed in a police chase, and that vehilce hit my old Cutlass I had then and knocked it in my front yard, was parked along the road. I've had another 79 F150 Custom that I bought almost new broken into. Stole everything that was in there... So I'll take anything that I can get. WHEW!Unk Bob
Moderator & parts slinger
Joined: Feb 2007
Posts: 50,158
Likes: 5,786
From: S/W Missouri, Polk county
Yea I do now since I just googled it, what are you needing to know?
And BTW howdy there gator!
Ok note to self, "do not bring a trailer load of tires and rims to be swapped around at Alans" only a few. Well thats all I have.......lol
If I get home this week, I am sure I have a passenger side 460 exhaust manifold.
And BTW howdy there gator!
Ok note to self, "do not bring a trailer load of tires and rims to be swapped around at Alans" only a few. Well thats all I have.......lol
If I get home this week, I am sure I have a passenger side 460 exhaust manifold.
Post Fiend
Joined: Dec 2006
Posts: 9,111
Likes: 3
From: Lexington Mo
Alan let me know if that 429 exhaust manifold worked, I think that came out of a 69-70 Lincoln. It should be the same, just wonder about the outlet, if it is pointing the same.
Rich any plans for the week that you are home again???
Grill is going, a couple of beers gone down the neck already.
Lee it was good to see you and Clayton today.
Unk Bob
Rich any plans for the week that you are home again???
Grill is going, a couple of beers gone down the neck already.
Lee it was good to see you and Clayton today.
Unk Bob
Lead Driver
Joined: Aug 2009
Posts: 7,562
Likes: 249
From: Laquey, MO
How's everyone's Sunday going?
I pulled a small chainsaw out of the shop that hasn't been used in at least a decade and cleaned it up so I could teach the kids to use one. I fully expected it to need tons of work, but the fool thing fired right up without much of a fuss. Now I just need a fuel filter and new chain and it will be time for them to help the old man out.
Going to try to take the van out and around the block a couple of times to keep it happy tomorrow. I really need some Ford time....
I pulled a small chainsaw out of the shop that hasn't been used in at least a decade and cleaned it up so I could teach the kids to use one. I fully expected it to need tons of work, but the fool thing fired right up without much of a fuss. Now I just need a fuel filter and new chain and it will be time for them to help the old man out.
Going to try to take the van out and around the block a couple of times to keep it happy tomorrow. I really need some Ford time....