When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Good morning guys
I've been doing the kijiji searches and for some reason this year I'm also doing the snowmobile section, can't afford one. They have those motorcycle conversions with a bolt in track section and ski, for the price of it, I would just buy the $9000 snowmobile it's meant to replace.
Agreed, I would never do that to a motorcycle, I can find better ways to spend 9k.
Hi Grant, is your weather as crappy as our`s? Low digits this week and barely above freezing next week.
Got my running around done with ease, picked up a gallon of KILZ general purpose primer sealer, it was the cheapest can of white anything. Managed to get the first coat on, but now it's getting humid and is cooling off fast. This table is as old as some of our posters, so I'm just trying to make it white for now, there's some varathane around here so it'll get coated with that the next time it's warm enough and then we'll be able to keep it clean. Day off time as I dont feel like putting on work clothes for an hour and a half of getting dirty.
I used a lot of KILZ with my rental house reno this spring, it worked well and the low cost was nice.
How did your sanding go today John, get most of it done?
I used a lot of KILZ with my rental house reno this spring, it worked well and the low cost was nice.
How did your sanding go today John, get most of it done?
I'll be at this for weeks Morris with the aches and pains I've got plus I'm likely being too fussy..lol
Better to be to fussy than not fussy enough, you'll see all the flaws and assume that everyone else see's them to. Amazing how many people decide it's taking to long to finish and then just rush it done.
Any wood that I build with outside I like to coat with some sort of sealer, if I'm buying it, it's done in kilz, like how well it reflects light in shops, especially if you clear coat the dark corners and other spots
You must be way too fussy John, better take heed of your aches and pains.
About 8-8 years ago I painted my shop Perry, it should be redone soon but I doubt I`ll ever do it again since I have way too much stuff to take out.
The RM reeve as well as my counselor didn`t have anyone run against them Colin. I haven`t heard any results from the Saskatoon election yet.