If you guys are looking for a Crew Cab I found one in Redding, CA on Craigslist. Somebody's gotta ****** this up since I can't right now! Here's the link and here's the ad:

This is a crew cab from a 1979 Ford F250 pickup, cab comes with frame all doors, and parts you see here, the windshield is cracked, but all other parts are good, please contact me if you have questions, thanks.<!-- START CLTAGS -->

 

Google for the Lug Nut King, I believe in California.

 

ChaseTruck754 do you have pictures of how you started the roof repair step by step. I would like to see this. I dont want to have to take the roof skin off because I only have some rust on the side as well that can be patched up.

 

Nope. I'm slow and haven't even started the roof repair yet. Still messing with the d60 front and diesel swap.

 

got to love the old crew cabs. mine is a 1979, that has dana 60's front and rear. i put disc brakes on the rear. had problem time and time again with the old drums. has built 460. have pretty much gone thru everything, will pull anything. dual tanks with a 40 gal one in the back. been a great old pickup

 

Hey I am getting ready to paint my 74 Crew does anybody know were I can find out what colors were available for the crew cabs in 74? Mine is solid white an I am thinking bout two tone with the white being the center color. It has the black vinyl interior an I am adding the roll bar steps etc.. to it.

 

'74 Ford truck paint colors.
AutoColorLibrary - Color Chip Selection

 

[quote

[/quote]

I have one just like this, in similar condition.....'73 F350 2x white, but with lots of rust. I am more of a bumpside fan. I would like to trade it for either parts or a bumpside crew.

 

I got this little gem a few months ago for $1000 on CL. The good: it doesn't need anything. The bad: It needs a lot of little things The ugly: the entire right side of this lemmon got "squeezed"

Seriously, it was a gamble, but my family is larger than my old regular cab, so this is the way to go. It is a great driver, but I would eventually like to do a full resto. Here's a few pics:

 

If you are looking for a crew to resto or for parts, here's one in Oregon for $500. It's not mine, but I wish I had the room!

motor runs great. good tires. needs clutch. pics say it all.
running motor is worth the $500 alone.
no email access so please call or text Rob @ 541 517-0155<!-- START CLTAGS -->

 

Here's a '79 F250 Crew 4X4 that is not a project! NICE!!

Here's the ad:

ford f-250 crew cab 400 ci. motor and c-6 auto tranny. has black vinal interior buckets w a flip down center counsle up front and a bench seat in the rear both in great shape it has new window and door seals. the whole interior is black and outside is ryder yellow. has all trim on it the extior has a small spot of rust above windsheild on passenger side and on driver side cab couner both about the size of a quater.also has a dent by the left tail light other then that a clean straight pickup. the motor runs great the tranny was rebuild not that log ago its a good dependable pick upneeds a key swith and a tie rod end and either the ground on the bed cleaned or check the wiring on the brake lights some times they dont work but other then that everything else works great i will try to fix these things soon but am very busy with work so might be willing to dicker on the price if not fixed when someone is iterested. i drove it from coosbay to roseburg twice a week for a year and never had any problems. the pickup is in coos bay right now hoping to move it to rosburg soon so people can look at it easyer if interested please call me at 541-290-9969 can get more pics soon<!-- START CLTAGS -->

 

Was this truck built in Prineville Oregon??

I have a few things that I would like to sell:

I am pulling out my seats. Front seat has some tears but is much better than some and wouldnt take a lot to get back into shape. Rear is in great shape!

I have a good Dana 60 that I dont need. 373 gears. $250 takes it away!


I need a bumper! Anyone in Oregon with a good strait bumper? Im also looking for a short bed canopy.

Thanks!!

 

Well lookie lookie at what showed up at my local JY, the blue long bed was driven in then then the stripping began, rims and carb and valve cover's so far, but there is alot still there to work with.

Just tripped over the short bed and well....floors look ok, cab drip rail area.. bed lip typical.

Anybody need some back door panels or badges ect.... IM me and we will go from there.

My location is incorrect, lol. Anybody need there location its just a IM away.

 

PM sent......

 

I hope that yellow crew doesn't go to waste, how long until they are crushed?