The New Sled Puller.
Thread Starter
|
Logistics Pro
Joined: Jul 2001
Posts: 4,137
Likes: 41
From: Marble Falls, Texas
Jack, I'm custom fabbing an intake spider. No SD stuff. Wait till you see it, you'll trip.
K, these next pics. Motor on the hoist ready to go it. Next, we encounter our first problem. Steering shaft won't clear the headers......MODIFY!!!!
K, these next pics. Motor on the hoist ready to go it. Next, we encounter our first problem. Steering shaft won't clear the headers......MODIFY!!!!
Posting Guru
Joined: Mar 2008
Posts: 1,669
Likes: 1
From: Billerica, MA
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Thread Starter
|
Logistics Pro
Joined: Jul 2001
Posts: 4,137
Likes: 41
From: Marble Falls, Texas
Today we got the front all buttoned up. Stopped for about 3 hours to ROB a clutch out of Rockee and put a single disk back in him. Dan at Valair had problems with my flywheel and we couldn't get them resolved in time. But not to worry, I'll have the real clutch shortly for it. It wasn't his fault.
And not in the pics, we got the tranny all ready for the new clutch, and got the dually bed reassembled with all it's new paint. To it's ready to drop on as soon as we get everything buttoned up tomorrow. Keep your fingers crossed guys, this one will be a nail biter!!!!!!!!!!!!!!!!
And not in the pics, we got the tranny all ready for the new clutch, and got the dually bed reassembled with all it's new paint. To it's ready to drop on as soon as we get everything buttoned up tomorrow. Keep your fingers crossed guys, this one will be a nail biter!!!!!!!!!!!!!!!!
Hotshot
Joined: Jun 2007
Posts: 10,008
Likes: 7
From: Austin, TX
Cody, seeing WEST SIDE i heard you saying it and now i'm rolling laughing. thanx
Thread Starter
|
Logistics Pro
Joined: Jul 2001
Posts: 4,137
Likes: 41
From: Marble Falls, Texas
Bad, my weight bracket is going to be a 5 1/2' wide Ford oval cut out of 1" plate. and I will hang tractor weights behind it. There is no time to build it for this event Sat. But it will be on there shortly. Not to mention, I just wanna see how the truck is gonna act. We'll start adding weight and traction after that.
Thanks Ross, I appreciate it man.
Thanks Ross, I appreciate it man.