Those bearings are effed... Good luck Brett.
Operation: Zebra build
Thread Starter
|
Lead Driver
Joined: May 2009
Posts: 6,807
Likes: 704
From: Tobyhanma, PA
Ok, well i took the hub off. For some reason the inner wheel bearing bit the dist and got shredded into next to nothing. This is all that's left of the inner bearing and the seal
http://www.flickr.com/photos/62639173@N03/7474157880/http://www.flickr.com/photos/62639173@N03/7474157880/ by http://www.flickr.com/people/62639173@N03/, on Flickr
Not sure, everything was still tight coming apart. Maybe not enough grease?
Anyway, once I gather the new parts I plan to use Encho's awesome write-up for reference to make sure everything goes back together smoothly.
http://www.flickr.com/photos/62639173@N03/7474157880/http://www.flickr.com/photos/62639173@N03/7474157880/ by http://www.flickr.com/people/62639173@N03/, on Flickr
Not sure, everything was still tight coming apart. Maybe not enough grease?
Anyway, once I gather the new parts I plan to use Encho's awesome write-up for reference to make sure everything goes back together smoothly.
Thread Starter
|
Lead Driver
Joined: May 2009
Posts: 6,807
Likes: 704
From: Tobyhanma, PA
Yeah thats what I'm worried about is the spindle. I still have part of the bearing to get off the spindle, hopefully its not too messed up, otherwise I'll be looking for a spindle I guess.
Thread Starter
|
Lead Driver
Joined: May 2009
Posts: 6,807
Likes: 704
From: Tobyhanma, PA
Yeah they are toast. I still don't know what caused it but wish I did so I can prevent it from happening again. I'm gonna double check the other side after I fix this hub.
Thread Starter
|
Lead Driver
Joined: May 2009
Posts: 6,807
Likes: 704
From: Tobyhanma, PA
Thankfully I found the receipt for the bearings and seals. I just got them in September so the warranty should still be good. Score!
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread Starter
|
Lead Driver
Joined: May 2009
Posts: 6,807
Likes: 704
From: Tobyhanma, PA
Yeah, I think I can get it out with a long punch and a few love taps.
For reference Advance auto can price match quite a ways down from retail and any employee can give you 20% off without needing a manager. Doesnt hurt to ask for a break on parts.
Now I just need to sell these extra heads I have. Anyone looking to upgrade their 302? I have GT40P heads and the proper exhaust manifolds. I've read that these are good for about 15 hp to the wheels over stock E7 heads.
For reference Advance auto can price match quite a ways down from retail and any employee can give you 20% off without needing a manager. Doesnt hurt to ask for a break on parts.
Now I just need to sell these extra heads I have. Anyone looking to upgrade their 302? I have GT40P heads and the proper exhaust manifolds. I've read that these are good for about 15 hp to the wheels over stock E7 heads.
Post Fiend
Joined: Nov 2011
Posts: 8,908
Likes: 1
From: Algona, Washington
Yeah, I think I can get it out with a long punch and a few love taps.
For reference Advance auto can price match quite a ways down from retail and any employee can give you 20% off without needing a manager. Doesnt hurt to ask for a break on parts.
Now I just need to sell these extra heads I have. Anyone looking to upgrade their 302? I have GT40P heads and the proper exhaust manifolds. I've read that these are good for about 15 hp to the wheels over stock E7 heads.
For reference Advance auto can price match quite a ways down from retail and any employee can give you 20% off without needing a manager. Doesnt hurt to ask for a break on parts.
Now I just need to sell these extra heads I have. Anyone looking to upgrade their 302? I have GT40P heads and the proper exhaust manifolds. I've read that these are good for about 15 hp to the wheels over stock E7 heads.
Thread Starter
|
Lead Driver
Joined: May 2009
Posts: 6,807
Likes: 704
From: Tobyhanma, PA
Awesome, I actually have the entire GT40 intake and all too, the whole she-bang all the way to the TB and most of the expo wire harness too. Just let me know I would make him a pretty good deal, only killer would be shipping.
FTE Chapter Leader
Joined: May 2009
Posts: 8,843
Likes: 27
From: Eastern Ky
