I changed my truck to display the dpf% and also had the fuzzy camera option. Changed it back and the fuzzy screen went away. Haven’t had a problem with it since.

I have made multiple changes to my 2020F350 with forscan but this is the only one that doesn’t work.

 

like i said it's only the bed camera all the rest are good and very clear..i think it's more important to know when you are approaching regen

i will leave the mod in
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xx
update 8/8/20 Removed the mod......the rear camera started giving trouble..(.pix-a-late) like when your watching satellite and it starts to rain....now it did clear up but came back every few times...not worth having more trouble or a camera burn out

 

Anyone know if this is functional or a carryover in the software from another vehicle? (I double tapped off on the traccontrol)

 

I don't see Auto Regen, DPF % or OCR on the spreadsheet for 2020 trucks. Maybe it was discussed previously but somehow I got OCR to work on my 2020 something I couldn't do on my 2019.

 

DPF% is on line 57

 

Are auto-fold mirrors an option on the 20s? Same programming as on 17-19s?

 

Mine are autofold from factory. Even a menu option in DIC.

ZooDad

 

I didn't even think to look for that option. Will check it out.

 

Greetings, I just received our trailer TPMS valves from Ford (originally ordered with the truck which was delivered in Dec) and had them installed this morning. I went activate them and it says "Trailer Tire Pressure Monitoring Capability Not Detected". We have the Ultimate Trailer package so is this something I have to active in Forscan? If so, do you know where I can find the commands to enable this system? I tried looking on the 2020 spreadsheet and did not see the line item (now I am not always the best at looking at things according to my wife) and I tried doing a search, but most threads discussed aftermarket systems or how to activate them once installed or issues with a larger fuel tank installed. Thank you in advance for your assistance.

 

Did you install more than just the sensors in the tires? It requires a receiver placed on the trailer and connected to the truck through a cable.

 

Umm. I did not install anything else. I just assumed that since adding the trailer TPMS's was an option when I ordered the truck and selecting the Ultimate Trailer option, it would have been integrated and this was all I needed.......So I need to purchase and install a module? This seems odd to me since when ordering the truck it made it sound like it was all integrated.

 

There is a receiver that has to be installed under the trailer. The trailer TPMS sensors communicate with that receiver and the receiver forwards the information onto the truck through a hardwired connection at the bumper or in the bed.

In 2017, the "user deployed" kit came with all the cables, adapters, receiver and sensors. I'm surprised you didn't get all that in one box if your truck was supposed to come with that option.

 

I've seen folks talking about the speedometer correction for 37" tires, has anyone figured out how to do it with 42" tires? I have 42" tires on the way for my F550 XLT that is being produced at the factory now. Ideally no service engine soon light or gear wrench light.

The specific kit is made by Buckstop Truckware, its a super-singles kit.

 

I don’t think ForScan can go that far out without DTC
You will most likely need a speedometer calibrator

 

Anyone had any luck adding bed lights to a 2020 F250? I tried the following to enable and it didnt work:

726-46-01 xxx* xxxx xxxx Bed_Lamp_Cfg ENUM: 0=DISABLE 1=ENABLE

Not sure if its an error or there is another setting I need to change.