When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm sure you will remember to remove the stickers and clean the residue or there will be traces there forever. That's fine for most guys, but I have a feeling that would bother you.
I'm sure you will remember to remove the stickers and clean the residue or there will be traces there forever. That's fine for most guys, but I have a feeling that would bother you.
Gavin will sterilize the pipes inside and out........spend hours with rubbing compound polishing them.....working down to 600 grit. Then wax them to a blinding shine.......
Notice........some of it is still in the sterilized packaging from the hospital........
Double bagged too.
Originally Posted by JEFFFAFA
That looks like an old school Borla from late 80's early 90's area. Had a pair on my 87 mustang GT. Loved the throaty sound and the burble.
It's a Summit Racing muffler. I got it because it was stainless steel and not too expensive. I think it will be loud.
Originally Posted by SavageNFS
I'm sure you will remember to remove the stickers and clean the residue or there will be traces there forever. That's fine for most guys, but I have a feeling that would bother you.
A wire wheel and some acetone should take care of them.
Originally Posted by Sailor_Roy
Gavin will sterilize the pipes inside and out........spend hours with rubbing compound polishing them.....working down to 600 grit. Then wax them to a blinding shine.......
600 grit, 1200 grit, buffing compound and then wax.
