When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sure Kinglg, no problem, except that I need your email address to get it to you. R.A.
I am looking in to rebuilding my e4od trans and was wondering if you would send me the zip file. The way everyone is talking on here it most be pretty helpful. Email is brucefauscett@yahoo.com thanks a lot.
I am going to continue reading to see if one if you ha e already answered my question. So here's is what happed. It started out as a hard shift and would then get hot and not want to shift into third. The other day I was driving and rolled the throttle on the old 460 to the floor it down shifted to second and a second or two later it up shifted then violently down shifted again. Then up shifts to no gear. I can select second but and soon as I go to drive there is rpms but no friction. I am planning a master rebuild kit from autozone. What I need to know is do I need any specialty tools, should the master rebuild kit fix the problem, and are there any suggestions. So everybody knows do have a fair amount of mechanical knowledge. I've done alot of things but this will be my first transmission rebuild. Please keep in mind I'm on a tight budget to say the least.
Could someone forward a copy of the zip file to me please? In the interim of waiting to get a copy of the zip file, i'm wondering if it contains an exploded schematic of the tranny?
Sounds like these zip files are a must have for rebuilding a e4od trans and I sure would like a copy! So if could get a copy it would greatly appreciated! Thanks! anthonyroth99@yahoo.com