When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3 yrs ago I had a couple of bigger sheds, 12 x 12, vinyl sided for a $1 ft/sq ft for labour. With the siding, new ply on the roofs and shingles it was about $3,000 for everything.
She's getting the cheapest siding there is from Rona at 5.50 a 10ft strip, it's made by Mitten, shed is 10 x 10. Most siding is $180 per 24 piece bundle at 151" but that's a lot of wastage on this job, they probably spent up to 1400 on supplies and 2 guys were there for 2 days and 1 might have been back on the 3rd day unless they put in at least 1 11 hour day. Houses are actually easier to do as you get to do more siding than trimming and you can lay more shingles before you get to the roof edge. Still get to charge 1.00 a foot.
Semi retired nowadays Steve and only do what I need to, to bad there's a lot of things that I need to do. Can hardly wait until I'm in the shop full time doing what I want to do.
Hello John, Grant, Steve, Perry, Shaun and all who lurk here.
I ready to order this damaged fender from the Old Car Centre in BC, it's priced at $200 plus shipping is about $200. What do you think John? Are your front fenders original Ford sheet metal?
That`ll complete my front end, I already have a re-pop right front fender I got last summer. I have a selection of hoods, nice gravel pan.
For my sheds I got siding for about 70 cent a sq ft Perry.
Hello Shaun, hopefully there`s no rioting on campus today.
How's your day going Steve?
Hello John, Grant, Steve, Perry, Shaun and all who lurk here.
I ready to order this damaged fender from the Old Car Centre in BC, it's priced at $200 plus shipping is about $200. What do you think John? Are your front fenders original Ford sheet metal?
That`ll complete my front end, I already have a re-pop right front fender I got last summer. I have a selection of hoods, nice gravel pan.
For my sheds I got siding for about 70 cent a sq ft Perry.
Hello Shaun, hopefully there`s no rioting on campus today.
How's your day going Steve?
Both fenders on my panel are re-pops Morris, right one fits better that the left. I paid $350 for mine..I used original fenders from a F-600 on my pickup but welded in smaller wheel well openings..
Its not as warm as predicted here but its still better than it could be. Decided to secure my vehicle doors on the garage, I've had an uneasy feeling this past week about break ins. The guy across the alley that can see my place is gone to 3 Hills for a few days and I'm not going to be around during the day time for a few days next week so that makes me an easy target.
This old sheet metal pretty much all comes from LMC so the quality is lacking, might be better off buying an old local fender and getting a school shop class to fix it for free.
Both fenders on my panel are re-pops Morris, right one fits better that the left. I paid $350 for mine..I used original fenders from a F-600 on my pickup but welded in smaller wheel well openings..
I have a couple of decent fenders from an F350 but my welding isn`t any wear near good enough to weld in the F100 pieces. I`m not overly concerned about how well a fender fits as long as it's not way out.
Originally Posted by privateer, eh
Its not as warm as predicted here but its still better than it could be. Decided to secure my vehicle doors on the garage, I've had an uneasy feeling this past week about break ins. The guy across the alley that can see my place is gone to 3 Hills for a few days and I'm not going to be around during the day time for a few days next week so that makes me an easy target.
This old sheet metal pretty much all comes from LMC so the quality is lacking, might be better off buying an old local fender and getting a school shop class to fix it for free.
At least make the thief work for it, most of the time the damage exceeds the missing items.
Unless you know someone running a shop class it's pretty hard to get anything in.
Our real feel temperature is -5 but its supposed to be +2 today. These guys will need a chainsaw to get in now. Went down the alley to look at some Triumph true spoke wheels and saw the landlords buddy's son smoking crack in his car with a ho, so that was my driving force for today's change of game plan. The mother and handicapped daughter support the 3 so called men in that house, the dad pretends to run a charity called Battle against Distracted driving but its just to take advantage of the government and daughter, the wife drives a school bus.
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Slideshow: The VelociRaptor Expedition gains a lift, upgraded suspension, Brembo brakes, and trail-ready equipment while retaining the stock 440-horsepower EcoBoost V6.
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Slideshow: Called the Fortress, the 850-horsepower pickup combines Raptor underpinnings with military-inspired features, survival equipment, and a starting price of $285,000.
