No topic thread part 3-2017
Hotshot
Joined: Sep 2012
Posts: 17,708
Likes: 136
From: Calgary
No snow here but it was almost cold enough for it, had a drizzle coming down most of the day. Managed to get some cleanup done and started to make a scrap metal load, figured that it would be prudent to get rid of anything that will take up valuable space. Won't be much of a load but every bit of room that I can make now will come in real handy this winter.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Thread Starter
|
Moderator
Joined: Dec 2003
Posts: 97,685
Likes: 2,023
From: Saskatoon, Saskatchewan
We had very light snow here last night and a bit through out the day John, hardly any left except for on my deck.
What`s the price of scrap steel like now Perry? I also have some big aluminum airplane parts to sell. If you don`t need that 76 F250 4 sp it`ll have to go too.
There are after hrs drop off boxes for scrap metals here too John. What`s the price of gas in Ont, Alberta now? We`re back up to $1.26, $1.16 at Costco and diesel is $1.15
What`s the price of scrap steel like now Perry? I also have some big aluminum airplane parts to sell. If you don`t need that 76 F250 4 sp it`ll have to go too.
There are after hrs drop off boxes for scrap metals here too John. What`s the price of gas in Ont, Alberta now? We`re back up to $1.26, $1.16 at Costco and diesel is $1.15
Hotshot
Joined: Sep 2012
Posts: 17,708
Likes: 136
From: Calgary
In the next week or so I'm setting the trucks up nose to nose and putting up the gantry crane so it would be about the right time to figure out how to get that transmission up here. That way when it's time to start blending these 2 trucks at least all the parts will be around to test fit them together and make my engine and transmission mounts. I don't know what the price of scrap metal is right now Morris but hopefully Trumps tariffs have raised the price, that way I can buy more panel boards for the fence and finish off the shed, still need about 25 boards.