I have developed yet ANOTHER problem!
Lead Driver
Joined: Aug 2003
Posts: 7,592
Likes: 10
From: **** hole San Jose ca.
This cam builder Howards Cams machines a little thin narrow flat line down the side of the lifter to let more oil run out on to the cam lobe for extra oiling which is kind of a good idea, as long as your using a High volume oil pump..
Orich
Thread Starter
|
Lead Driver
Joined: Jul 2011
Posts: 8,679
Likes: 191
From: On the Edge of the Desert
I'm sure many of us can relate. Between work, school and basic life crap, there just aren't enough hours in the day.
But this morning I was able to get the cam and lifters cleaned, graphite and lube coated, and installed back In the block. So now I basically just have the timing cover and intake left to install, then put everything back in the truck and back together. I'm hoping to have it done Tuesday night or Wednesday.
I can't believe it's taken me this long already. This all started 3 weeks ago....
But this morning I was able to get the cam and lifters cleaned, graphite and lube coated, and installed back In the block. So now I basically just have the timing cover and intake left to install, then put everything back in the truck and back together. I'm hoping to have it done Tuesday night or Wednesday.
I can't believe it's taken me this long already. This all started 3 weeks ago....
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Hotshot
Joined: Mar 2013
Posts: 14,255
Likes: 199
From: Phoenix, Az.
I'm sure many of us can relate. Between work, school and basic life crap, there just aren't enough hours in the day.
But this morning I was able to get the cam and lifters cleaned, graphite and lube coated, and installed back In the block. So now I basically just have the timing cover and intake left to install, then put everything back in the truck and back together. I'm hoping to have it done Tuesday night or Wednesday.
I can't believe it's taken me this long already. This all started 3 weeks ago....
But this morning I was able to get the cam and lifters cleaned, graphite and lube coated, and installed back In the block. So now I basically just have the timing cover and intake left to install, then put everything back in the truck and back together. I'm hoping to have it done Tuesday night or Wednesday.
I can't believe it's taken me this long already. This all started 3 weeks ago....
Speaking of which, do you know anybody with a Bobcat for hire cheap?
Hotshot
Joined: Mar 2013
Posts: 14,255
Likes: 199
From: Phoenix, Az.
YES! What he needs done would prolly only take that tractor 18-30 minutes to do. The dirt in the middle of his back yard he tilled this past saturday. It just needs to be pushed to the back of his yard to level everything out. When are you and it available? Please PM, text, or call me.
Thread Starter
|
Lead Driver
Joined: Jul 2011
Posts: 8,679
Likes: 191
From: On the Edge of the Desert
Originally Posted by JEFFFAFA
YES! What he needs done would prolly only take that tractor 18-30 minutes to do. The dirt in the middle of his back yard he tilled this past saturday. It just needs to be pushed to the back of his yard to level everything out. When are you and it available? Please PM, text, or call me.