General Discussion Thread
Senior User
Joined: Feb 2015
Posts: 317
Likes: 0
From: Odessa Mo
I'm right there with you. This is one of the few aftermarket steering wheels that I've seen that really look sharp.
Moderator & parts slinger
Joined: Feb 2007
Posts: 50,251
Likes: 5,815
From: S/W Missouri, Polk county
Evening gents, I am about to use a 27/32 drill bit on my Bronco knuckle to clean it up and test fit a bushing. Might have to go up to a 7/8, should not be to bad I am almost there already.
Hotshot
Joined: Sep 2012
Posts: 17,708
Likes: 136
From: Calgary
I don't know Rich, a 32nd" is almost a millimeter, pretty big step, might be the one to watch out for lol.
Going to Edmonton this weekend, one of those rumor mill trips. Buddy Chris is back in Ontario closing their house and his wife and daughter have never been to Edmonton before so that makes me the tour guide. First vacation in over 3 years and when I get back there should be a half dozen stories and soap operas going on in other peoples brains, that'll give me the opportunity to seperate the wheat from the idiots.
Changed up the program this week and it's pre winter construction, neighbour had some lumber that he sent my way, nails and all. Beggars can't be choosy this week.
Going to Edmonton this weekend, one of those rumor mill trips. Buddy Chris is back in Ontario closing their house and his wife and daughter have never been to Edmonton before so that makes me the tour guide. First vacation in over 3 years and when I get back there should be a half dozen stories and soap operas going on in other peoples brains, that'll give me the opportunity to seperate the wheat from the idiots.
Changed up the program this week and it's pre winter construction, neighbour had some lumber that he sent my way, nails and all. Beggars can't be choosy this week.
Thread Starter
|
Postmaster
Joined: Sep 2013
Posts: 2,595
Likes: 5
From: Pasadena, Ca
ok, so....
The vacuum canister is only needed on trucks with vacuum actuated a/c? i dont have one, and want to know if i need one. my heater doesnt look like it has any vacuum lines to it.
The vacuum canister is only needed on trucks with vacuum actuated a/c? i dont have one, and want to know if i need one. my heater doesnt look like it has any vacuum lines to it.
Moderator & parts slinger
Joined: Feb 2007
Posts: 50,251
Likes: 5,815
From: S/W Missouri, Polk county
Very cool and different. I envision a propane bottle hooked up so you can make flames come out mouth the nostrils...and at least red lights in the eyes.
Off to the parade with the Hillbilly-Bug and grandson.
Off to the parade with the Hillbilly-Bug and grandson.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Tuned
Joined: Jun 2014
Posts: 475
Likes: 34
From: Vermont
Yup, that sure was a big 'ol moon last night! The eclipse was different but not all that impressive. Still neat. Building a log cabin hunting camp every day and came home in the dark and happened to look up after wondering why it was so light out.
Thread Starter
|
Postmaster
Joined: Sep 2013
Posts: 2,595
Likes: 5
From: Pasadena, Ca
i glanced up at the blood moon last night, as my truck was loaded on a flat bed going to its new owner. Yep, sold it. Too much money needed to be put into it just to get that little 1" sticker.
Plus, my plans are to move to texas next year, so why hassle a california truck?
Plus, my plans are to move to texas next year, so why hassle a california truck?