Gauge
Senior User
Joined: Oct 2012
Posts: 354
Likes: 3
GlowShift Ford 6.0L Diesel Fuel Pressure Adapter
Install Pictures
If you go with hard plumbing right to the test port, you may also need a 45* 1/8npt fitting to clear the rad hose.
Install Pictures
If you go with hard plumbing right to the test port, you may also need a 45* 1/8npt fitting to clear the rad hose.
Senior User
Joined: Oct 2012
Posts: 354
Likes: 3
Help me braille my way thru this.
Not that I mind Googleing for the parts for the fuel sensor, but I just do not want to mess anything up.
So to hook into my Dashboss for Fuel Pressure I buy -
Pressure transducer 0-100 psi | Dashboss - Critical Vehicle Health Monitoring
And Lilpooh you say I need adapter (we have the same year truck btw) If I go into Napa and say I need: M12-1.5 male o-ring to 1/8npt female
They will know what adapter that would be? Or do you have a part number?
Any snaps where to hook this? An idiots guide?
Thanks again guys!
Not that I mind Googleing for the parts for the fuel sensor, but I just do not want to mess anything up.
So to hook into my Dashboss for Fuel Pressure I buy -
Pressure transducer 0-100 psi | Dashboss - Critical Vehicle Health Monitoring
And Lilpooh you say I need adapter (we have the same year truck btw) If I go into Napa and say I need: M12-1.5 male o-ring to 1/8npt female
They will know what adapter that would be? Or do you have a part number?
Any snaps where to hook this? An idiots guide?
Thanks again guys!
Ford 6.0 External Sensor Tips and tricks | DashBoss
Thread
Thread Starter
Forum
Replies
Last Post
lilmatt119
Performance & General Engine Building
14
Jun 25, 2012 01:00 AM
Tylus
6.0L Power Stroke Diesel
13
Sep 30, 2011 01:16 PM
