When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Every pic I post is taken on my phone. I'm actually replying now using it too. Full internet and a 5 megapixel camera with flash. Same one I posted pics of a couple days ago...
Every pic I post is taken on my phone. I'm actually replying now using it too. Full internet and a 5 megapixel camera with flash. Same one I posted pics of a couple byrne ago...
Damn, your phone is almost as cool as you are
You and Travis need to quit posting so much, you guys are about to catch my ***.
Kind of disappointed I haven't seen Mark or Brent talk about how bad the current 3-ply plywood is compared to the old 5-ply. Not much better than the OSB, aka chipboard.
Joe, it does hold up better than particle board (now called MDF to make it sound better), but the glue/resin that holds the wood chips together does deteriorate when exposed to the rain or UV. The exposure 1 glue (CDX) does help it stay together, but if we'd have had a hail storm every 3-5 years which required your roof to be replaced, the OSB wouldn't be holding up that well. Of course the 3-ply plywood would be telegraphing the rafter by now since it tends to warm more than the old stuff.
You can still get the 5-ply or better in BC (interior) in both pine and hardwoods, but it's a lot more pricey. I used Red Oak for my cabinets when I built my house.
I'm still 12+ pages behind, so if any of this has come up already, I apologize.
every glue line in a piece of veneer plywood makes it stiffer. There is also more handling as the thinner veneer is easier to break, especially in larger sheets. They take the veneer, 2 "sets", with alternating grain, 1 goes through a roller for the glue application( both sides at once), the other goes in the stack, they alternate the stack and probably stack 3-4 pieces thick in the press at once. Hydraulic pressure clamps it flat....Radio frequency, hot oil conduction, or steam heats the glue to set it, it comes out for trimming....a damn hot operation.... but if you ever get to see a radio frequency plywood press its kinda cool....completely wipes out FM radio reception while the RF is on.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Ways Ford is LOSING to the Competition
Joe Kucinski
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Are you serious? What could possibly be wrong with those girls?
I should be glad you and I never ended up on a date. Who can live up to such standards?
They're not UNattractive.... they just LOOK young... Out of my last 5 g/f's, 4 were 24-26 but NONE of them looked it - they just had a more .... mature .... look to them... tough to explain, but that's the gist of it
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Slideshow: The VelociRaptor Expedition gains a lift, upgraded suspension, Brembo brakes, and trail-ready equipment while retaining the stock 440-horsepower EcoBoost V6.
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Slideshow: Called the Fortress, the 850-horsepower pickup combines Raptor underpinnings with military-inspired features, survival equipment, and a starting price of $285,000.