bored and drunk
Thread Starter
|
Its Comin Right for us!
Joined: Feb 2005
Posts: 12,219
Likes: 2,676
From: GA
you dont have a bed to hack off?
still trying to get my tranny t-case doubler bla bla combo in, its bolted together, but ive been working on getting the shifters mocked up and adjusted perfect before i get it in the truck since its much easier to do on the ground
hopefully im going to set it in the truck tomorrow
still trying to get my tranny t-case doubler bla bla combo in, its bolted together, but ive been working on getting the shifters mocked up and adjusted perfect before i get it in the truck since its much easier to do on the ground
hopefully im going to set it in the truck tomorrow
Laughing Gas
Joined: Jun 2003
Posts: 1,048
Likes: 16
ha i just read the whole thing, and currently my truck is in the barn being shortened to 108" wheelbase, and im also making tube bed for it. this is pretty funny. KO thats a very good lookin truck man. i know that when in need of inspiration, and unsubscribed help i always looked at yours and Cutts galleries, because i knew that yall would almost allways have the tech that i needed for my truck there.
Lead Driver
Joined: May 2000
Posts: 9,236
Likes: 12
From: Senoia, GA
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Lead Driver
Joined: May 2000
Posts: 9,236
Likes: 12
From: Senoia, GA
Originally Posted by my79f
i know that when in need of inspiration, and unsubscribed help i always looked at yours and Cutts galleries, because i knew that yall would almost allways have the tech that i needed for my truck there.
-cutts-
Senior User
Joined: Apr 2005
Posts: 208
Likes: 0
good to hear your still making progess. I started on my bed today. Looks just like yours!!! haha... still llots to do though. since ive been on this forum KO's truck has been an inspiration for me, (cut fenders, shackleflip,low lift)
Thread Starter
|
Its Comin Right for us!
Joined: Feb 2005
Posts: 12,219
Likes: 2,676
From: GA
Thanks for the compliments man!!!
start a buildup thread for your flatbed on here and lets see some pics!!!
I got my tranny and T-cases up in the truck tonight after some fighting and trimming to a cab crossmember
im going to have to do some fabricating to the stock tranny crossmember to get it to clear the front d-shaft....also got to fab a crossmember for the 203 doubler adapter....and relocate the 205 mount
I ithink im going to be able to make my current exhaust work...its gonna be tight with a few minor adjustments!!!
the long drivetrain sure does look purdy under there...and i cant wait to hack 2 feet off my rear shaft and have a longer front shaft!!
start a buildup thread for your flatbed on here and lets see some pics!!!
I got my tranny and T-cases up in the truck tonight after some fighting and trimming to a cab crossmember
im going to have to do some fabricating to the stock tranny crossmember to get it to clear the front d-shaft....also got to fab a crossmember for the 203 doubler adapter....and relocate the 205 mount
I ithink im going to be able to make my current exhaust work...its gonna be tight with a few minor adjustments!!!
the long drivetrain sure does look purdy under there...and i cant wait to hack 2 feet off my rear shaft and have a longer front shaft!!
