When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The other night my back was so sore that it woke me up so I used a power heat/massager that did wonders.
What did you use, exhaust manifolds or headers? I have a few different sets of headers but none of them would work with the 1980 Mercury front clip so I`m using a set of 351 stock manifolds, they are bigger than the 302 ones.
Using the stock manifolds. I'm lucky if I can get about 3 hours sleep before my back , shoulder or hip wakes me up..
Took the 50 out for a spin today to blow the winter dust of it. Had Matthew and his friend with me and he thought it was really cool that it did not have seat belts. As we were driving and the drivers door was rattling I remembered that I had found some carrage bolts when I was cleaning up the garage this spring. When I got home I took the old bolts out of the door catch and put in the new bolts with some locktite. Hopefully that will keep the catch in place and keep the food from rattling.
It`s great when younger kids get exposed to older vehicles like our`s and even greater when they have a genuine interest.
I plated my stock 64 XL and my stock 53 M100 yesterday when it was super nice, today sucked with the cold and wind so I didn`t go for a cruise.
Originally Posted by 56panelford
Using the stock manifolds. I'm lucky if I can get about 3 hours sleep before my back , shoulder or hip wakes me up..
I`m stuck with stock manifolds unless I can find headers that will work with the clip on my 56 M100.
Is it arthritis John or worn out body parts?
Thats right Moe, all set for a parade,
the 96 X 5.0L runs great but cancer is setting in
I want to get a 2012 Jeep Wrangler to replace the Ford, white of course
Happy Sunday Mornin'all. Have to work this morning. Bro went on a load to Milwaukee. Let a couple trucks out, do some paperwork, and hopefully home by noon. Have a great day guy's.
It was very windy here yesterday Morris but the temp was still decent, I was comfortable in a T Shirt.
Although my daughter wouldn't admit it she, likes riding in the old truck also.
Gerry, buy a black one, they look so much better. ;-) At least that is the color i would get.
Blaney scores first stage win in Texas, still leading the pack!
Originally Posted by GIGGER
Thats right Moe, all set for a parade,
the 96 X 5.0L runs great but cancer is setting in
I want to get a 2012 Jeep Wrangler to replace the Ford, white of course
You can never replace a Ford with anything less.
Originally Posted by yamagrant
Happy Sunday Mornin'all. Have to work this morning. Bro went on a load to Milwaukee. Let a couple trucks out, do some paperwork, and hopefully home by noon. Have a great day guy's.
Hi Grant, at least things are rolling along at your end, a lot are just grinding along hopping things pick up soon.
Originally Posted by Corner Gas
It was very windy here yesterday Morris but the temp was still decent, I was comfortable in a T Shirt.
Although my daughter wouldn't admit it she, likes riding in the old truck also.
Gerry, buy a black one, they look so much better. ;-) At least that is the color i would get.
Chores are done for the day, now I get to kick back and watch the roundy round race on FOX, it may be a fake race though. Guy says he's going to drop by and look at a 351m motor and C6 combo that I have in back. I'll never use it so it would be nice to see it go. This is clean out and raise the shelter time for the next 2 weeks and it would be nice to close it all off with a $350 tip and then I'll be ready for May with everything that I want done, done.
No parades around here except for at the dump, guy in front of me was in a 68 Fargo 600.
It`s great when younger kids get exposed to older vehicles like our`s and even greater when they have a genuine interest.
I plated my stock 64 XL and my stock 53 M100 yesterday when it was super nice, today sucked with the cold and wind so I didn`t go for a cruise.
I`m stuck with stock manifolds unless I can find headers that will work with the clip on my 56 M100.
Is it arthritis John or worn out body parts?
Worn out body parts and the onset of arthritis Morris...
Team Gushue is the 2017 Ford World Men's #Curling Champions!
Originally Posted by GIGGER
Thx Colin, there are a lot of black ones out there but no white
I hear you M, not sure what to do.....
the end of the nascar race made me mad, I wanted the kid to win
It`s easy for me to say what you should buy but if I`m not paying for it best I keep quiet.
The last part of the race was a heart breaker but the kid still did good, leading for part of the race and picking up points. He`ll be dynamite in a few yrs.
Originally Posted by 56panelford
Worn out body parts and the onset of arthritis Morris...
I can relate to that, the golden yrs aren`t all that golden.
Originally Posted by Corner Gas
Me to I was hoping Joey would hold on, I never like to see Jimmy Johnson win.
