No topic thread part 3-2017
Hotshot
Joined: Sep 2012
Posts: 17,708
Likes: 136
From: Calgary
I must admit that I wasn't expecting the call but it was nice to get seeing as we have good weather for at least 10 days. This place will always have something that should be done but at least in a week all of the mandatory jobs will be done and I'll have a place to work out of, there's already an upgrade list starting with a horizontal mill and another 360 square feet of room. Lol
Thread Starter
|
Moderator
Joined: Dec 2003
Posts: 97,703
Likes: 2,027
From: Saskatoon, Saskatchewan
I hope that we too get nice weather for awhile yet, it`s too early for it to be cold and I still have tons of stuff to do around my farmyard before that happens. How often will you use of the horizontal milling machine Perry?
So it was another busy night again Steve...is there any other kind for you at work?
You can still get 100% gas?
Same here Perry, I should get electric fuel pumps for my vehicles that sit for long periods.
So it was another busy night again Steve...is there any other kind for you at work?
You can still get 100% gas?Same here Perry, I should get electric fuel pumps for my vehicles that sit for long periods.
Hotshot
Joined: Sep 2012
Posts: 17,708
Likes: 136
From: Calgary
I had to install an inline filter because it creates more sludge in my tank but the gas bar with ethanol is .02 a liter cheaper most days and .06 a liter cheaper on Monday and Thursday around here.
FTE Legend
Joined: Nov 2008
Posts: 68,653
Likes: 340
From: Heart of Dixie
Yes, Morris.. I run 100% gas in both my motorcycles 93 octane.. There is one station in town that has all three grade in 100%.. That is all they sell..
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Fords to Drive Before You Die
Joe Kucinski
3 Best / Worst Features Of The 2025+ Ford Expedition
Brett Foote
10 Ways Ford is LOSING to the Competition
Joe Kucinski
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
Hotshot
Joined: Sep 2012
Posts: 17,708
Likes: 136
From: Calgary
Just wrapping up doing my brother's running around, good day for it as its warm and sunny. When I get home I think I'll put a new door on the shop seeing as there's 2 solid wood doors waiting to be hung. These are the doors that set me back $6.25 for all 3 and I sold one for $30 a few months ago, pretty hard deal to turn down.
Hotshot
Joined: Sep 2012
Posts: 17,708
Likes: 136
From: Calgary
There was a catch to the doors, its best if your under 6 feet if you want to use them but they weigh about 50 pounds each. Had to take an inch off one side of the door as it was easier than messing with the glass stucco on the garage. I'm putting in some floor level heat ducting in the shop so it means that there's going to be a step to get over in order to get into the shop but that should discourage stupid people from coming in after they've had a face plant or 2. Still need to put on the lock system so for now I have 2 doors in one door way.