When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
When running AE, I am looking at the "Throttle Position Sensor Status" reading and "Throttle Position Mode". Neither of those will register any data on AE while I'm pushing the throttle pedal. Shouldn't I see something on either of these data outputs?
If you look at the throttle position volts, it will likely peak out at about 3.85 volts while floored. This has been the most common voltage I've seen.