2013 Knee-deep BS thread!
Hotshot
Joined: Jul 2002
Posts: 18,305
Likes: 9,068
From: Sheridan / Gilchrist
Belated good evening all. Just getting back home.
Been working on the pickup today. Attacked the transmission cooler line leak and finally got it narrowed down. Found a hole in the rigid line just before the connection to the flexible lines. Got that taken care of, but then found out I didn't have enough hose clamps. Guess I'll finish it up in the morning after I can get some more hose clamps.
Looks like someone(s) have been having fun at Don's shop!
Been working on the pickup today. Attacked the transmission cooler line leak and finally got it narrowed down. Found a hole in the rigid line just before the connection to the flexible lines. Got that taken care of, but then found out I didn't have enough hose clamps. Guess I'll finish it up in the morning after I can get some more hose clamps.
Looks like someone(s) have been having fun at Don's shop!
Post Fiend
Joined: Jan 2005
Posts: 26,337
Likes: 12
From: Paradise Found!
Morning Rob! This last week was finally getting where we should be......
Taking today off, and watching the race!
Hotshot
Joined: Jul 2002
Posts: 18,305
Likes: 9,068
From: Sheridan / Gilchrist
Good morning Oregon and everyone everywhere else. Fish were biting in the river this morning. Rooster Tails were working like a champ.
Have to run into town this morning for some hose clamps then I can finish up on the pickup transmission cooler line leak.
Have to run into town this morning for some hose clamps then I can finish up on the pickup transmission cooler line leak.
FTE Chapter Leader
Joined: Mar 2009
Posts: 12,340
Likes: 215
From: Seaside, Oregon
The weather has been great here the last week, so I have been taking advantage of it and getting things done outside. I would like to get out and do some fishing also but with all the trips to Christmas Valley has been burning the extra money. Have to go back on Wednesday oh the joys.
Postmaster
Joined: Jun 2010
Posts: 2,928
Likes: 0
From: Oregon City, Oregon
Good morning Oregon FTE gang and friends.
Morning Don, Gerry, Chris, Jim, Dave and Rob.
Finally getting back into a more normal routine after all of the graduation activities this weekend.
I cut the grass and cleaned up after the herd of dogs.
Heading over to the in-laws to stack some wood. And then a BBQ or something for my BIL's birthday.
Morning Don, Gerry, Chris, Jim, Dave and Rob.
Finally getting back into a more normal routine after all of the graduation activities this weekend.
I cut the grass and cleaned up after the herd of dogs.
Heading over to the in-laws to stack some wood. And then a BBQ or something for my BIL's birthday.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Lead Driver
Joined: Oct 2004
Posts: 8,062
Likes: 35
From: Central Oregon
Afternoon, just in from Portland. rode the bike over to Portland and to the race track, very good riding. Coming out of Portland this morning, I did not get out of the cold and clouds until I was above 2500' on Hood.
FTE Legend
Joined: May 2008
Posts: 56,542
Likes: 0
From: In my own world
Good. You took a break for me!
The upper shop is cleaned of all but the South Bend mill, and the drawing table.
Next 2 days, and the bottom shop will be the same, all but the Cincinati, and the cnc will be gone. This has been a LONNNGGG and emotional 2 weeks
I think the ground has raised around the shop, lol
The upper shop is cleaned of all but the South Bend mill, and the drawing table.
Next 2 days, and the bottom shop will be the same, all but the Cincinati, and the cnc will be gone. This has been a LONNNGGG and emotional 2 weeks
I think the ground has raised around the shop, lol
Hotshot
Joined: Jul 2002
Posts: 18,305
Likes: 9,068
From: Sheridan / Gilchrist
A quick flyby. Took time to watch the race, then on to some chores around here. Got the transmission cooler line problem resolved (I think) and now it is off to Dallas for fuel and then the farm chores.