June B.S. Thread
VT Chapter Ldr
Joined: Apr 2004
Posts: 96,160
Likes: 294
From: Orange, Vermont
Ah, just do it. Who cares! LOL
Long day today. But that's okay. Had to work on Saab's today. Mine and Tom's. Mine completely managed to sheer the teeth off of one of the sprockets for the balance chain. So, it's no longer balanced anymore! LOL They don't need the balance shaft running at all.
Now just gotta put it back together. Tom's just needs a new hydraulic line for the top...
Long day today. But that's okay. Had to work on Saab's today. Mine and Tom's. Mine completely managed to sheer the teeth off of one of the sprockets for the balance chain. So, it's no longer balanced anymore! LOL They don't need the balance shaft running at all.
Now just gotta put it back together. Tom's just needs a new hydraulic line for the top...
Lead Driver
Joined: Apr 2003
Posts: 9,965
Likes: 1
From: H-town, MN
Good morning Jim, Dennis and MN.
Another beautiful day in paradise today! Looks like we got some warm weather for a few days here..........about time! Did I mention today is FRIDAY!!!! Waaaahooooooo!
Another beautiful day in paradise today! Looks like we got some warm weather for a few days here..........about time! Did I mention today is FRIDAY!!!! Waaaahooooooo!
Lead Driver
Joined: Apr 2003
Posts: 9,965
Likes: 1
From: H-town, MN
Posting Guru
Joined: Dec 2008
Posts: 1,764
Likes: 0
I'll do it again when you have time. I was thinking I'd run E85 the second time, just to satisfy my curiosity.
Yesssss!
So I think I mentioned that the gasket set I got for the top end was wrong. I cannot locate a head gasket anywhere but from England. That will cost roughly $38 plus shipping.
I went onto ebay and I can buy a complete gasket kit (for the whole engine) delivered for about $44. I think this is a no brainer...
I went onto ebay and I can buy a complete gasket kit (for the whole engine) delivered for about $44. I think this is a no brainer...
Evening everyone. Just got done reinstalling the second door. I have one more in the garage drying. That one has two coats of poly. I think it's going to need a third coat. It will after I get done picking the stupid bugs off of it.
The other two look great. They actually match the casing. I was trying to match the moulding. The moulding is off color because it was CHEAP. 99 cents per 8 ft after rebate. Now I have a problem. The moulding is too light and the doors match the casing perfectly. I might have to break down and buy the right moulding.
Time for bed soon. Night all!
The other two look great. They actually match the casing. I was trying to match the moulding. The moulding is off color because it was CHEAP. 99 cents per 8 ft after rebate. Now I have a problem. The moulding is too light and the doors match the casing perfectly. I might have to break down and buy the right moulding.
Time for bed soon. Night all!
Good morning MN! Nice to wake up to 70*.
VT Chapter Ldr
Joined: Apr 2004
Posts: 96,160
Likes: 294
From: Orange, Vermont
Good morning Cory. You are correct today is Friday! Dave favorite day of the week
VT Chapter Ldr
Joined: Apr 2004
Posts: 96,160
Likes: 294
From: Orange, Vermont
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Postmaster
Joined: Jul 2009
Posts: 3,526
Likes: 0
From: Lunchtown
TGIF! Finally!
Good Morning Jim,Dennis, Cory, Jim, Dave, Troy and everyone else!
My problem with the trim is that it is obvious and I am **** about it. It gets me into alot of trouble trying to make things the way I think they should look or make them match.
Good Morning Jim,Dennis, Cory, Jim, Dave, Troy and everyone else!
My problem with the trim is that it is obvious and I am **** about it. It gets me into alot of trouble trying to make things the way I think they should look or make them match.
Fleet Owner
Joined: Mar 2007
Posts: 28,312
Likes: 6
From: BLT, MN
I'm still gonna run tomorrow. I don't think I'll let you know the results or you'll be back in the tuner looking for more.
I'll do it again when you have time. I was thinking I'd run E85 the second time, just to satisfy my curiosity.
Yesssss!
So how long will your parts take to ship from England?
That is satisfying work when you can hang the doors back up. Unless you're real ****, or the color is black and white, I wouldn't worry about it. I finished the laundry room a few years ago using left over trim from a bunch of different projects, all different shades of stain, and no one has noticed yet. I still see it though. I just don't care.
Good morning MN! Nice to wake up to 70*.
I'll do it again when you have time. I was thinking I'd run E85 the second time, just to satisfy my curiosity.
Yesssss!
So how long will your parts take to ship from England?
That is satisfying work when you can hang the doors back up. Unless you're real ****, or the color is black and white, I wouldn't worry about it. I finished the laundry room a few years ago using left over trim from a bunch of different projects, all different shades of stain, and no one has noticed yet. I still see it though. I just don't care.
Good morning MN! Nice to wake up to 70*.
Well, you would be right. But even I know to order the complete kit...
Good morning to the rest of you.