When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My name is Jim. I have a 71 f100 4wd that I’m starting on. I have had it since 1999 and the last time it was drove was in 2012. I have a cab fenders and doors stripped to bare metal and epoxy primed and are ready for final sanding and paint
My name is Jim. I have a 71 f100 4wd that I’m starting on. I have had it since 1999 and the last time it was drove was in 2012. I have a cab fenders and doors stripped to bare metal and epoxy primed and are ready for final sanding and paint
Frame shortened for short box. Going to start stripping rust. I’m removing the four rear xmembers and cleaning up behind them and bolting them back up next
Last edited by 1971f1004wd; Oct 12, 2024 at 12:45 AM.
Reason: Adding pictures
Got the rear of the frame all cleaned and primed The lift kit will be delivered Friday. Going to pull the rearend out and get it cleaned up and primed next