When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
hahaha... that's exactly what i was looking for. Either it wasn't there last time I logged in.... or I'm a Tard. Reliable sources point towards the latter.
Flying cars are nothing new, have been around since the 1930's. Mechanix Illustrated in the 1950's had a feature for a do-it-yourself flying car.
Then there was that car in the 40's or early 50's that you towed the wings behind you in a trailer...What a mess! It took 3 licenses to drive it, a driver license, a pilot license, and a trailer permit...
The flying car isn't purely science fiction. In the 1940s, inventors managed to fly a car from California to Ohio, although the model never took off because of cost and technical limitations. But in 1973, an inventor named Henry Smolinski tried to succeed where others failed by strapping the wings and tail from a Cessna aircraft to, of all cars, a Ford Pinto. During a test flight in California, the Pinto broke free, plummeting to earth and killing Smolinski and his passenger. Some things are better left to the movies.
The flying car isn't purely science fiction. In the 1940s, inventors managed to fly a car from California to Ohio, although the model never took off because of cost and technical limitations. But in 1973, an inventor named Henry Smolinski tried to succeed where others failed by strapping the wings and tail from a Cessna aircraft to, of all cars, a Ford Pinto. During a test flight in California, the Pinto broke free, plummeting to earth and killing Smolinski and his passenger. Some things are better left to the movies.
In the future if you're going to copy/paste from an article please credit the source
I was driving my 5.4L F250 and had the gauge fluctuate from 1/2 to 1/8 during my short drive. Do you guys notice that? That seemed huge to move around. I know it had about a 1/4 of a tank.
My gauge screws up fairly often. But it corrects itself within a half hour or so. I understand why it corrects slowly, it is buffering the level data. But I don't understand why it gets a bad level reading to begin the cycle.
I know for a fact it will do it if you don't turn the key off during fuel-up. But it does it other times too.