When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Happy Hump Day mornin'all. Morris are you running dual exhaust? I've got a bunch of parts sitting the garage for the 56. Can't wait to get started. Have a great day guy's.
Happy hiump day back at you Grant.
My 53 M100 is all stock except for a 12 V conversion with an alternator, chrome grill and running boards, rear bumper and signal lights. I would like get a dual exhaust some day.
Originally Posted by 56panelford
Good morning all..
How are things east of Winterpeg John? Did you finally decide on that rear bumper yet?
Happy hiump day back at you Grant.
My 53 M100 is all stock except for a 12 V conversion with an alternator, chrome grill and running boards, rear bumper and signal lights. I would like get a dual exhaust some day.
How are things east of Winterpeg John? Did you finally decide on that rear bumper yet?
Once I get the box back on the frame I'll do some measuring and decide how I'm going to make it Morris, How wide is the rear bumper on your truck and do you have any pics of it. My bumper will be different than stock because my license plate goes in the roll pan..
Once I get the box back on the frame I'll do some measuring and decide how I'm going to make it Morris, How wide is the rear bumper on your truck and do you have any pics of it. My bumper will be different than stock because my license plate goes in the roll pan..
I`ll try to post a picture of my back bumper John,
I`ll measure it but I think it`s the same width as the front.
Originally Posted by yamagrant
Happy Thursday mornin'all. John: Did you buy a pan or make one? Have a great day guy's.
I have some thin sheet metal and going to fab one up to see if I like the look of it before committing of making one out of the 1/4" stock I have, I already have a roll pan installed. This is it right after I welded it on..
[QUOTE=56panelford;16261962]Found this one on the web Morris which gives me an idea of how wide they are but if you could measure yours that would be great..
It`s 61 3/8 ''wide John.
The smoke was getting pretty thick here this afternoon.
