quick ram mounting question...
Street Queen to the extr3m3
Joined: Jan 2005
Posts: 4,554
Likes: 3
From: Lubbock, Texas
My welding teacher at a vocational school I went to after regular highschool was an absolute nut case. Every day we had to show him what we did and get graded on our work. One day this kid (real moron) was holding this piece of 3/8 plate with what looked like strings of snot on it instead of welds and kept complaining "hurry up its hot." My teacher grabbed the metal with his bare hands and licked it. No chit!
he was one of those "Im 65 years old and Im not using the few marbles left rattling around in my head to worry about retards" kind of guy.
So Im sticking with touch it!
he was one of those "Im 65 years old and Im not using the few marbles left rattling around in my head to worry about retards" kind of guy.
So Im sticking with touch it!
yep class A nut case right there!
just another Rockwell looser
Joined: Feb 2003
Posts: 4,042
Likes: 0
From: Cocoa, FL
both works just fine......but digital gauges are a must.....
Post Fiend
Joined: Jan 2004
Posts: 5,377
Likes: 2
From: Elkhart IN
Senior User
Joined: Jan 2008
Posts: 439
Likes: 0
From: Yuma, AZ
Metal just welds itself together as soon as Chuck Norris enters the room.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Senior User
Joined: Jan 2008
Posts: 439
Likes: 0
From: Yuma, AZ
Yes! But in the case of the women, they are immediately empregnated w/ sextuplets
Post Fiend
Joined: May 2004
Posts: 5,277
Likes: 0
From: St George, SC I-95
The best stick machine Ive ever used is a Hobart 250. Im not a professional welder by any means but it was better than the Lincoln 250 AC/DC I learned on and the 250 AC/DC in my shop. I loved using the miller mig and tig but for some reason (either me or the machine) I couldnt tig worth a shat.
Senior User
Joined: Jan 2008
Posts: 439
Likes: 0
From: Yuma, AZ
The best stick machine Ive ever used is a Hobart 250. Im not a professional welder by any means but it was better than the Lincoln 250 AC/DC I learned on and the 250 AC/DC in my shop. I loved using the miller mig and tig but for some reason (either me or the machine) I couldnt tig worth a shat.
Post Fiend
Joined: May 2004
Posts: 5,277
Likes: 0
From: St George, SC I-95
My brain had a hard time telling my foot to back out of the pedal once the metal heated up and wanted to burn through. Then when I backed off I stuck the tip.
Its been years since Ive tried again though.
Its been years since Ive tried again though.
Thread
Thread Starter
Forum
Replies
Last Post
Rokcrln
1948 - 1956 F1, F100 & Larger F-Series Trucks
59
Feb 25, 2017 05:50 PM
JDMitchell
1997 - 2006 Expedition & Navigator
2
Feb 24, 2011 12:29 PM
