When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
'65 F100. I've had it just about a month now, in the middle of stripping down. All of the dash is out, except for the ignition switch. I have no key. The switch will be replaced anyway.
Stuff I've read says the key is needed, otherwise, drilling out the tumbler is the only way.
It that it? Or are there any secrets that can be revealed.
Called around, but decided to drill it anyway. All I wanted to save was the bezel, cup and spring. Started with a 5/16" drill and once it got to the bottom of the tumbler, she slid right out. Took less time than I spent on the phone.
The only thing left in the interior now is the wiper motor.
Had the same challenge with my replacement cab. Watched a you tube video where a kid about 10 years old showed how to pick a lock with a thin piece of metal. Took a few minutes to make the jig and it actually worked really well. Couldn't believe how easy it was. Saved the jig in case I ever needed it again but have no idea where it is now. lol.
