99-03 Leaf Spring Tech
Thread Starter
|
Cargo Master
Joined: May 2018
Posts: 2,442
Likes: 993
These are like what I used (mine were diy)
https://www.offroaddesign.com/1-zero...it-3-wide.html
The track bar/bushing has a slight angle to it but no binding or issues. The top spring pad (top of the leaf) has to be ground out a little bit as well.
Hotshot
Joined: Jul 2008
Posts: 12,782
Likes: 2,142
From: N.GA Mountains
Zero rate blocks with offset holes.
These are like what I used (mine were diy)
https://www.offroaddesign.com/1-zero...it-3-wide.html
The track bar/bushing has a slight angle to it but no binding or issues. The top spring pad (top of the leaf) has to be ground out a little bit as well.
These are like what I used (mine were diy)
https://www.offroaddesign.com/1-zero...it-3-wide.html
The track bar/bushing has a slight angle to it but no binding or issues. The top spring pad (top of the leaf) has to be ground out a little bit as well.
Thread
Thread Starter
Forum
Replies
Last Post
Macs1964F100
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
7
May 27, 2014 08:40 PM
