help with 2003 7.3l
Thread Starter
|
New User
Joined: Sep 2019
Posts: 1
Likes: 0
help with 2003 7.3l
in this video is what the truck is doing put new icp ipr cps new vale covers gaskets it is hard to start cranks and cranks before it starts it is like i have no boost ipr stays around 63% no more then 8lbs of boost icp is around 750 wont go much higher 400 at idle ipwms 4.5 help been working on it to long
It's a Van Gogh
Joined: Feb 2010
Posts: 7,802
Likes: 1,333
From: Elk Grove, CA
Sorry cannot see video. Welcome to FTE anyhow! We'll help you figure this out.
Are the new sensors all OE Ford or IH? Asking since some aftermarket parts are not so good.
So it takes a long time to start, but it does start? Or just no start?
How is the fuel and oil level?
Are the new sensors all OE Ford or IH? Asking since some aftermarket parts are not so good.
So it takes a long time to start, but it does start? Or just no start?
How is the fuel and oil level?
FTE Leadership Emeritus
Joined: May 2014
Posts: 27,348
Likes: 5,941
From: Lake Hartwell, GA
Just to follow up with Walleye Hunter suggested, you may find some assistance in the Tech Folder linked below.
https://www.ford-trucks.com/forums/1...-7-3l-psd.html
Also, the "Cody Test" refers to an injector O-ring test which details can be found by searching and the link below.
https://www.ford-trucks.com/forums/1...l#post18608442
https://www.ford-trucks.com/forums/1...-7-3l-psd.html
Also, the "Cody Test" refers to an injector O-ring test which details can be found by searching and the link below.
https://www.ford-trucks.com/forums/1...l#post18608442
Thread
Thread Starter
Forum
Replies
Last Post
American Air-1
1999 - 2003 7.3L Power Stroke Diesel
10
Sep 18, 2009 09:44 PM
