No topic thread part 3-2017
FTE Legend
Joined: Oct 2005
Posts: 283,683
Likes: 8,269
From: northwestern Ontario
It's looking like I will need to move my steering column in the panel..
Right now it's on the vertical section of the firewall looks as though if I put it through the toe board just a little higher than the original opening it will work with 3 U-joints..
Right now it's on the vertical section of the firewall looks as though if I put it through the toe board just a little higher than the original opening it will work with 3 U-joints..
Thread Starter
|
Moderator
Joined: Dec 2003
Posts: 97,591
Likes: 2,008
From: Saskatoon, Saskatchewan
How long will it take to move your steering column in the panel John?
That immovable object looks like it was a ton of extra work Perry.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Hotshot
Joined: Sep 2012
Posts: 17,708
Likes: 136
From: Calgary
I was going to put a post at the garage corner but there was 6" of concrete there so I figured that I would put it beside the other post and have both gate hanging posts side by side 40" away from the garage. Dug down 6" and surprise, more concrete, sent down a couple of more probes and 7' out I was still hitting concrete. So I dug out the skill saw that has a concrete blade and hoped that there was no rebar as this blade kicks back when you hit rebar. Tomorrow I'll dig out the 2 holes and plant the posts. I'm going to wind up with a 13'6" vehicle gate but one section will be a bifold. My jobs always seem to have a catch to them.
Thread Starter
|
Moderator
Joined: Dec 2003
Posts: 97,591
Likes: 2,008
From: Saskatoon, Saskatchewan
I think that`s got almost got me beat but I did build a corral fence with a space in it for a tree many yrs back. Now the corrals and cattle are long gone but that big old tree is still happily living there. 