When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You have my sympathy's Marv. My county is 1,900 square miles and we only have 1,600 people in it.......
I'm originally from Aitkin County, Minnesota: 1995 sq. mi., and around 16,000, most-of-whom are in the other end of the county, so I'm familiar with that population density.
We get back there during the summer, but I miss it the rest of the time.
Marge couldn't live there, not enough convenient shopping. Mall Of America is 130 miles away.
Think I'll go write a letter to my state representative, not that he would read it or pay attention anyway. They have the carbon tax fuels bill, SB 324, coming up in a House Committee tomorrow at 1500. Guess they have got to do something to raise the price of gas / diesel and help the millionaires pay for their Tesla's.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
New ball joints? I don't see piles of snow on the ground.
We only got 6" on this last one. on top of the 3" from before. I scraped down to bare balck top with the tractor, and heated with the salamander before the project.
Originally Posted by SpringerPop
You using a moly-based chassis lube there, Sunshine?
Ball joints are FAR easier on a 2WD!
Pop
I used the waterproof grease that was in the gun from greasing the skid steer. I assume it's moly base, I know ehen that crap gets on you, you have to use Dawn dish washing detergent to get it off
We only got 6" on this last one. on top of the 3" from before. I scraped down to bare balck top with the tractor, and heated with the salamander before the project.
I used the waterproof grease that was in the gun from greasing the skid steer. I assume it's moly base, I know ehen that crap gets on you, you have to use Dawn dish washing detergent to get it off
I agree about the 4x4 ball joints.
I was thinking........dangerous.......Working on the 5th wheel axles with the ez-lube hubs. Use a grease gun full of dawn....pump it in until all the grease is pumped out. Bearing is clean. Now pump in grease until only grease comes out. Now the bearings are lubed.........