Need tech. help!!!!! Please.

Reply Subscribe

Thread Tools

Search this Thread

Jul 10, 2011 | 10:55 PM

#31

Swamp Lizzard

Thread Starter

Junior User

Joined: Jun 2011

Posts: 64

Likes: 0

I looked on ebay and the IPR socket is freakn rediculous. How much are they normaly? What is the price should I expect to pay for the IPR?

Jul 10, 2011 | 11:14 PM

#32

rdunagan

Posting Guru

Joined: Oct 2010

Posts: 1,192

Likes: 0

From: Kerrville, Tx

IPR normally goes from 200-250. i would just use a small pipe wrench thats what i used. if you do studs more than likely you wouldnt have to worry about the motor but you would need to update some things while your there. dont do the "one at a time" method its to risky! if you do studs replace the gaskets, standpipes, plugs, stc fitting, ect... i can give you a list if you want me to

Jul 10, 2011 | 11:41 PM

#33

Swamp Lizzard

Thread Starter

Junior User

Joined: Jun 2011

Posts: 64

Likes: 0

I would greatly appreciate that.

Jul 11, 2011 | 12:08 AM

#34

rdunagan

Posting Guru

Joined: Oct 2010

Posts: 1,192

Likes: 0

From: Kerrville, Tx

here is what i would get.
gaskets
studs
stc fitting
dummy plugs
standpipes
blue spring kit
injector o ring kit
intake gasket kit
bullet proof egr cooler
oil cooler
but since you have some of that you can take it off thats just my list though and someone chime in if im missing something i believe i am but then again my mind doesnt work that well late at night

Jul 11, 2011 | 05:44 AM

#35

bismic

Fleet Owner

Joined: Nov 2003

Posts: 27,900

Likes: 3,617

I see you are in Tx. If you want, I can mail you an IPR socket as a loaner. Just re-imburse me the shipping. PM me if you are interested.

Jul 11, 2011 | 10:05 AM

#36

Swamp Lizzard

Thread Starter

Junior User

Joined: Jun 2011

Posts: 64

Likes: 0

I am searching every angle and just can't find a way to get to it without removing the turbo. From top I can't get to the plug to disconect and from the bottom I can't reach it. Any ideas before I start removing turbo?

Jul 11, 2011 | 12:12 PM

#37

rdunagan

Posting Guru

Joined: Oct 2010

Posts: 1,192

Likes: 0

From: Kerrville, Tx

should be able to get it from the bottom. if you have big hands though its gonna be hard with the turbo in there

Jul 11, 2011 | 12:44 PM

#38

Swamp Lizzard

Thread Starter

Junior User

Joined: Jun 2011

Posts: 64

Likes: 0

Here is a photo and I can't see too much crap on the screen. What do you think?

Attached Images

FTE Stories

Ford Trucks for Ford Truck Enthusiasts

10 Things Every Truck Owner NEEDS (2026 Edition)

Michael S. Palmer

Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath

Verdad Gallardo

Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer

Joe Kucinski

2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)

Brett Foote

Top 10 Ford Truck Tragedies

Joe Kucinski

AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make

Brett Foote

Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!

Michael S. Palmer

Ford's 2001 Explorer Sportsman Concept Looks For a New Home

Verdad Gallardo

10 Best Ford Truck Engines We Miss the Most!

Joe Kucinski

2026 Shelby F-150 Off-Road: Better Than a Raptor R?

Brett Foote

Jul 11, 2011 | 12:49 PM

#39

Swamp Lizzard

Thread Starter

Junior User

Joined: Jun 2011

Posts: 64

Likes: 0

Well................... I just tried gently to remove the screen and the plastic that holds the screen shattered. So I need one regardless now. Is there anything I should do while I wait on the new one to come in. Clean HPOP, or maybr the turbo?