Exhaust sound clips
Post Fiend
Joined: Jan 2004
Posts: 6,610
Likes: 2
From: Northwest, Arkansas
OK everyone this is now going to be a sticky but only for exhaust sound clips. Any conversation or general posts will be removed. This way we can keep the thread on topic and easy to look through.
When posting a sound clip please do the following.
1) Year and model of your truck.
2) List an extra mods that you have done to the truck as these could affect sound.
3) List the make and series of the exhaust you have put on.
Thanks in advance for everyone's help on this thread. Now enjoy the sounds. Sorry to remove previous posts but to get this started fresh with posting rules upfront it worked out that way. Please post back up all your sounds.
Follow-up discussion can be found here https://www.ford-trucks.com/forums/7...clip-talk.html
When posting a sound clip please do the following.
1) Year and model of your truck.
2) List an extra mods that you have done to the truck as these could affect sound.
3) List the make and series of the exhaust you have put on.
Thanks in advance for everyone's help on this thread. Now enjoy the sounds. Sorry to remove previous posts but to get this started fresh with posting rules upfront it worked out that way. Please post back up all your sounds.
Follow-up discussion can be found here https://www.ford-trucks.com/forums/7...clip-talk.html
Thread Starter
|
Post Fiend
Joined: Jan 2007
Posts: 7,021
Likes: 5
From: Almost Heaven
1994 F150 300I6/EFI w/ both working cats
Previous; 2.25 catback Y pipe / dual glasspacks
YouTube - '94 F150 Flareside 300 I6 Dual Exhaust
Now; Flowmaster Super 40
YouTube - Flowmaster Super 40 300I6
Previous; 2.25 catback Y pipe / dual glasspacks
YouTube - '94 F150 Flareside 300 I6 Dual Exhaust
Now; Flowmaster Super 40
YouTube - Flowmaster Super 40 300I6
Elder User
Joined: Oct 2002
Posts: 516
Likes: 1
From: La Crosse, WI
Truck: 1978 F150, stock 4.9L block
Mods/exhaust: Offy dual plane intake, Motorcraft 2 barrel, hedman header 3 into 1 and 3 into 1, 2.5" pipes into dual in/out flowmaster, 2.5" tailpipe exiting in front of passenger rear tire.
Enjoy!!
truck also has 36" tires with stock 3.50 gears, still moves pretty darn good!!
Mods/exhaust: Offy dual plane intake, Motorcraft 2 barrel, hedman header 3 into 1 and 3 into 1, 2.5" pipes into dual in/out flowmaster, 2.5" tailpipe exiting in front of passenger rear tire.
Enjoy!!
truck also has 36" tires with stock 3.50 gears, still moves pretty darn good!!
Senior User
Joined: Oct 2006
Posts: 166
Likes: 0
1989 ford f150 300/6
k&n drop-in,
2 1/2" walker downpipe and a 2 3/4" straight pipe, custom 45'd (cut both pipes at 22.5 degrees) with a 4 inch tip
YouTube - straight pipe
k&n drop-in,
2 1/2" walker downpipe and a 2 3/4" straight pipe, custom 45'd (cut both pipes at 22.5 degrees) with a 4 inch tip
YouTube - straight pipe
Senior User
Joined: Jan 2005
Posts: 128
Likes: 0
From: Albany, Oregon
Postmaster
Joined: Dec 2006
Posts: 3,603
Likes: 10
From: Spokane, WA
Trending Topics
Postmaster
Joined: Mar 2002
Posts: 3,545
Likes: 4
From: Coal Region
Current set up: Hedmen headers, custom 2 1/4" y pipe into a single magnaflow cat 2 1/2" out follwed up by a 4" x 20" tip exiting in front of the rear tire.
Notes: its loud, VERY loud but not much of a tone. some say it sounds like a 2 stroke diesel mixed with a sea plane taking off.
Set up: EFI manifolds with stock first cat/y pipe with 2 1/2" into a small case magnaflow dumped before the rear axle.
Notes: probably the best sound out of everything i tried. did not have as much of a ricey tone as it seems to have in the video, the mic on the camera wasnt to good.
Set up: EFI manifolds with stock first cat/y pipe with 2 1/2" pipe running just at the end of the bed and no muffler.
Notes: its loud, VERY loud but not much of a tone. some say it sounds like a 2 stroke diesel mixed with a sea plane taking off.
Set up: EFI manifolds with stock first cat/y pipe with 2 1/2" into a small case magnaflow dumped before the rear axle.
Notes: probably the best sound out of everything i tried. did not have as much of a ricey tone as it seems to have in the video, the mic on the camera wasnt to good.
Set up: EFI manifolds with stock first cat/y pipe with 2 1/2" pipe running just at the end of the bed and no muffler.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Thread Starter
|
Post Fiend
Joined: Jan 2007
Posts: 7,021
Likes: 5
From: Almost Heaven
Did you try clicking on the pictures?
Did a mod delete my new exhaust post? Anyway here's my new setup again.
YouTube - NEW HiFlow Cat/Flowmaster Super 40
I like it now. I still get that annoying droning noise at higher rpms. I want to add extra pipe if I ever get the time. I think by simply redirecting the noise farther away from the muffler exit it will kill some of that droning noise.
Maybe 1.5' of straight 2.25 pipe. I know the turndown kills the droning noise but also makes it quieter. I'm thinking maybe because of the bend...??? I don't know.
Any suggestions on how to kill that droning noise without hurting sound quality would be much appreciated!
Thread Starter
|
Post Fiend
Joined: Jan 2007
Posts: 7,021
Likes: 5
From: Almost Heaven
Did some more work to my exhaust. I'm through. I like it now.
YouTube - New set up; High Flow Cat / tail pipe
Ditched the Flowmaster. I kept the high flow cat and ran pipe into a replacement tailpipe. Gave her *pop*.
YouTube - New set up; High Flow Cat / tail pipe
Ditched the Flowmaster. I kept the high flow cat and ran pipe into a replacement tailpipe. Gave her *pop*.
Thread Starter
|
Post Fiend
Joined: Jan 2007
Posts: 7,021
Likes: 5
From: Almost Heaven
YouTube - Cherry Bomb Muffler/ City Drive
Added a 31'' Cherry Bomb Muffler. I was afraid of catching the wrong police officer's attention. IMHO it sounds just as good if not better than the Flowmaster Super40 I had. Plus it's a straight through design. Wish I had known this before paying all that money for the FMS40.
Added a 31'' Cherry Bomb Muffler. I was afraid of catching the wrong police officer's attention. IMHO it sounds just as good if not better than the Flowmaster Super40 I had. Plus it's a straight through design. Wish I had known this before paying all that money for the FMS40.
Postmaster
Joined: Mar 2002
Posts: 3,545
Likes: 4
From: Coal Region
u been busy, sounds like me when i was trying to find that perfect sound...
just a few temp set ups as i was trying different mufflers.
Set up: Hedmen headers, custom 2 1/4" y pipe into a single magnaflow cat 2 1/2" out follwed up by a Raptor turbo and nothing after
Set up: Hedmen headers, custom 2 1/4" y pipe into a single magnaflow cat 2 1/2" out follwed up by a magnaflow SI/DO and nothing after
i have a few more of my new and probably permenant set up, just need to upload.
just a few temp set ups as i was trying different mufflers.
Set up: Hedmen headers, custom 2 1/4" y pipe into a single magnaflow cat 2 1/2" out follwed up by a Raptor turbo and nothing after
Set up: Hedmen headers, custom 2 1/4" y pipe into a single magnaflow cat 2 1/2" out follwed up by a magnaflow SI/DO and nothing after
i have a few more of my new and probably permenant set up, just need to upload.
Junior User
Joined: Feb 2008
Posts: 54
Likes: 0
From: Buckeye Country
Been reading these forums for a while since I got My truck in February realized that nobody had a clip of this muffler posted
1994 f150 xl
4.9l
4spd granny first
Accel tune up kit
Jeg's red hot coil
walker down pipe
jegs 2.5" flex coupler
4ft jegs 2.5" exhaust pipe
Moroso spiral flow muffler
just rolled 209,000 and still runnin strong
1994 f150 4.9L / 300 c.i.d. spiral flow exhaust
1994 f150 xl
4.9l
4spd granny first
Accel tune up kit
Jeg's red hot coil
walker down pipe
jegs 2.5" flex coupler
4ft jegs 2.5" exhaust pipe
Moroso spiral flow muffler
just rolled 209,000 and still runnin strong
1994 f150 4.9L / 300 c.i.d. spiral flow exhaust
Posting Guru
Joined: Sep 2004
Posts: 1,556
Likes: 5
clifford dual out efi headers
cat(s) delete
X pipe (photo in gallery)
dual 2" pipe
2 generic turbo tube mufflers
turn downs are located on the muffler exits (photo in gallery)
VIDEO CLICK ME
cat(s) delete
X pipe (photo in gallery)
dual 2" pipe
2 generic turbo tube mufflers
turn downs are located on the muffler exits (photo in gallery)
VIDEO CLICK ME
Thread Starter
|
Post Fiend
Joined: Jan 2007
Posts: 7,021
Likes: 5
From: Almost Heaven
Here's another one;
YouTube - Walk Around/ Joy Ride
And one more coming up shortly of me revving it from the outside. Keep in mind my vids are taken with a digital cam.
YouTube - Walk Around/ Joy Ride
And one more coming up shortly of me revving it from the outside. Keep in mind my vids are taken with a digital cam.