Member Build Threads
New User
Joined: May 2016
Posts: 9
Likes: 0
1951/52 F-3 Panel Ex-Military (S)
New User
Joined: Jan 2016
Posts: 12
Likes: 0
1st panel fitting
nos metal welded in
original wood
adding L bend steel in corners (same guage as original frame) of interior bed framing
trailer fenders bonded to panel sides increasing body stability
2 sheets of 3/4 inch plytanium tongue and groove split in center... entire floor is 3/8 inch from body...then silicone is used as buffer between floor and body...when cured it became a flexible seal that also adds strength to body side bracing.
wood is just for looks now
fenders are ready for wide tires if need be I will be using 15 inch thins all around
New User
Joined: Jan 2016
Posts: 12
Likes: 0
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Logistics Pro
Joined: Nov 2011
Posts: 4,685
Likes: 81
From: Northville, MI
That is exactly the same paint that I have purchased. It s good to see it on a truck. 
Did you paint it yourself?
http://www.tcpglobal.com/KUS-HRF1701...l#.V0yKn5MrLo0
Did you paint it yourself?
http://www.tcpglobal.com/KUS-HRF1701...l#.V0yKn5MrLo0