C6 kick down rod

Reply Subscribe

Thread Tools

Search this Thread

Oct 14, 2014 | 06:35 AM

Bud Mud

Thread Starter

Laughing Gas

Joined: Mar 2014

Posts: 917

Likes: 14

C6 kick down rod

anybody have one? I never notice it wasnt there,i need the rod(tube?) and clip's that fasten it to the carb and tranny,i have the 351m. THANKS

Oct 14, 2014 | 05:55 PM

mikeo0o0o0

Hotshot

Joined: Apr 2009

Posts: 14,333

Likes: 247

From: Stanley, VA

Quote:

Originally Posted by Bud Mud

anybody have one? I never notice it wasnt there,i need the rod(tube?) and clip's that fasten it to the carb and tranny,i have the 351m. THANKS

I don't have one but just so you know, not having the rod on a C6 isn't critical. All you lose is the kickdown to passing gear. It won't damage the tranny.

Oct 14, 2014 | 06:10 PM

mikeo0o0o0

Hotshot

Joined: Apr 2009

Posts: 14,333

Likes: 247

From: Stanley, VA

I also did a search and couldn't find any dealer or obsolete parts supplier that had one.
Kickdown rod '77 F100 350 w/ 351/400 & C6
D7TZ-7A187-B

Snap ring, 2 required
97409-S8
13/64" ID X 17/32" OD X 1/32" Thick.

Oct 14, 2014 | 06:34 PM

JWC 3

Lead Driver

Joined: Dec 2012

Posts: 7,877

Likes: 49

From: Tennessee

I inadvertently left mine off a few years ago . No ill effect,and I barely notice it . It sits on a shelf in my shop. One day
.....

Oct 14, 2014 | 06:45 PM

gatorfor88

Postmaster

Joined: Jan 2013

Posts: 3,512

Likes: 3

From: Panama City

Ther should be literally millions of these in junk yards everywhere. If "Cash for Clunkers " didnt hit your local yard too hard

Oct 14, 2014 | 07:01 PM

Bud Mud

Thread Starter

Laughing Gas

Joined: Mar 2014

Posts: 917

Likes: 14

thanks guy's,i know it wont hurt anything not being,but it would be nice to have when i need it. Thanks for the spec's,i may just make one.

Oct 14, 2014 | 08:15 PM

460me

More Turbo

Joined: Nov 2003

Posts: 747

Likes: 26

Lokar makes a kick down cable for the C6

10 Things Every Truck Owner NEEDS (2026 Edition)

Michael S. Palmer

Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath

Verdad Gallardo

Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer

Joe Kucinski

2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)

Brett Foote

Top 10 Ford Truck Tragedies

Joe Kucinski

AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make

Brett Foote

Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!

Michael S. Palmer

Ford's 2001 Explorer Sportsman Concept Looks For a New Home

Verdad Gallardo

10 Best Ford Truck Engines We Miss the Most!

Joe Kucinski

2026 Shelby F-150 Off-Road: Better Than a Raptor R?

Brett Foote

Oct 15, 2014 | 08:29 AM

sirrealism

Junior User

Joined: Oct 2014

Posts: 56

Likes: 0

They are nice to have but an quick fix is to turn your modulator in 1/2 turn. This will give you more vacuum response when needed for kick down plus give you just a bit later shift and also firm up the shift. If 1/2 turn doesnt do it you can go a full turn but if its tight at all stop or you will rupture the modulator. Since the 351 likes a little more RPMS you will probably find a little more power then you had.

Oct 15, 2014 | 10:46 AM

#10

Bud Mud

Thread Starter

Laughing Gas

Joined: Mar 2014

Posts: 917

Likes: 14

Quote:

Originally Posted by sirrealism

are you talking about the taking the vacum hose off and the screw inside?

Oct 15, 2014 | 02:12 PM

#11

redroad

Lead Driver

Joined: Nov 2006

Posts: 5,217

Likes: 506

From: Pa.

I'd trade you one for a 351m 4wd dipstick and dipstick tube ..

Oct 15, 2014 | 04:27 PM

#12

sirrealism

Junior User

Joined: Oct 2014

Posts: 56

Likes: 0

yes the vacuum line at the trans. Inside the modulator there is a flat head screw. turn it in 1/2 turn and put the vacuum line back on and take it for a drive.