Rusty Frame .. ??
Thread Starter
|
Freshman User
Joined: Sep 2010
Posts: 25
Likes: 0
Rusty Frame .. ??
Hey there, I'm a new auto dealer and I have a 2006 F-250 with some rust on the frame. I was wondering if you guys had any tips on how to clean the rust off or make the frame look better ?
Post Fiend
Joined: Aug 2010
Posts: 13,710
Likes: 5
From: Manchester, CT
ive been under my truck a couple nights a week with a chisel, few wire brushes and other assorted stuff. i think im mainly scraping off old undercoating but there is some surface rust that im getting off too. then i proceed with rustoleum black paint that will say stops rust on the can. the rustoleum undercoating paint is terrible, dont waste your money. never sticks to anything
Elder User
Joined: Oct 2006
Posts: 835
Likes: 1
i used a paint product called por15....check it out at POR15, Inc. - Stop Rust Permanently - Repair Gas & Fuel Tanks
best stuff in the world!!
best stuff in the world!!
New User
Joined: Nov 2009
Posts: 15
Likes: 2
you have to get the rust and most important the buried underling moisture off first. If you actually follow the directions of products such as POR15 you will see you need to remove all but the very thin surface rust. That then can be encapsulated and sealed off from any moisture by the POR coat. There is no quick fix to rust.
Hotshot
Joined: May 2005
Posts: 13,484
Likes: 42
From: Stevens Point, WI
I use a chisel like scraper to scrape off any loose rust flakes then undercoat the entire vehicle with diesel waste oil. It kills the rust, lubes joints and bushings, never rusts again. Plus the diesel waste oil is black and stays black so it looks just like the factory coating.
Trending Topics
New User
Joined: Sep 2010
Posts: 2
Likes: 0
I just bought an 06 F-250 V-10. Ive been hearing this "rattling/buzzing" noise when i step on the gas.. usually at a certain rpm. Someone told me it could be a hole in the muffler, or the fire shield. I went underneath today and boy.. rust. The muffler is damn near fallin apart. When I bought it, i knew the underside wasnt mint but god damn! I patched the hole in the muffler for a quick fix, and i ripped the heat shield out of it. any ideas?
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Post Fiend
Joined: Aug 2010
Posts: 13,710
Likes: 5
From: Manchester, CT
I just bought an 06 F-250 V-10. Ive been hearing this "rattling/buzzing" noise when i step on the gas.. usually at a certain rpm. Someone told me it could be a hole in the muffler, or the fire shield. I went underneath today and boy.. rust. The muffler is damn near fallin apart. When I bought it, i knew the underside wasnt mint but god damn! I patched the hole in the muffler for a quick fix, and i ripped the heat shield out of it. any ideas?
Elder User
Joined: Dec 2008
Posts: 745
Likes: 4
From: North Carolina
If so just be honest, leave the rust there, and bring it to the attention of the perspective buyer. That way the buyer can decide if he wants to buy a truck with rust damage, and he can see the extent of it.
Senior User
Joined: Sep 2010
Posts: 293
Likes: 0
From: the nutmeg state "CT"
As a buyer in the market currently. I can tell that you any truck I look at w/ fresh black paint on the under carriage gets a thank you for your time from me. That may just be me though. I want to know what is actually going on down there.
Post Fiend
Joined: Jul 2005
Posts: 6,127
Likes: 6
My truck is about to be sandblasted to remove loose rust, then coated with a marine zinc coating that will virtually halt further rusting for a few years.
But then... my truck is not for sale... for quite a while.
Thread
Thread Starter
Forum
Replies
Last Post
