Too many holes?
Thread Starter
|
Senior User
Joined: Apr 2010
Posts: 324
Likes: 1
From: San Tan Valley, AZ
Too many holes?
I cannot figure out how to upload the pictures onto the thread, but was able to put them in my garage. All I know is that the motor was going to be put into a '68 Bronco, and that its a 393 stroker. I'm just curious why there are 4 exahust bolt holes per cylinder. Any ideas?
I pulled off the Jet Hot headers I can't use, and scraped off the tape that had been over the exhaust ports. Just curious what kind of heads, and motor I've come upon.
Thanks for the help.
I pulled off the Jet Hot headers I can't use, and scraped off the tape that had been over the exhaust ports. Just curious what kind of heads, and motor I've come upon.
Thanks for the help.
Thread Starter
|
Senior User
Joined: Apr 2010
Posts: 324
Likes: 1
From: San Tan Valley, AZ
well, I found the heads.
http://www.worldcastings.com/products/windsor-sr-iron-heads.html
Thank you all.
http://www.worldcastings.com/products/windsor-sr-iron-heads.html
Thank you all.
Thread
Thread Starter
Forum
Replies
Last Post
