Scan gauge update.
Post Fiend
Joined: Apr 2004
Posts: 12,835
Likes: 3
From: Silver Lake Dunes, MI
As for the 12volt power. You guys are getting way too concerned about it! calm down! Chances are extremely slim you will need to do anything other than plug the OBD II cable in and mount the gauge. Even if you do have to wire power to it there are at least 10 key on power sources you can pull from and not have to think about your gauge ever again.
Thread Starter
|
PREMIUM SPONSOR
Joined: Sep 2003
Posts: 2,630
Likes: 217
From: North East Ohio
Like Tim said, switched source doesn't mean a toggle on your dash, just a key-on source.
The concern is if the gauge happens to draw too much power through the OBD2 while the truck is turned off (like kills your batts or something) THEN you need to pull the jumper, add the short harness that's included and run it to a key-on source.
That's all...
The concern is if the gauge happens to draw too much power through the OBD2 while the truck is turned off (like kills your batts or something) THEN you need to pull the jumper, add the short harness that's included and run it to a key-on source.
That's all...
__________________
'96 7.3 F-350 Reg Cab 4x4 - bought new.
'04 6.0 E-350 custom 4x4
'08 6.4 F-550 Reg Cab 6 spd 4x4
'17 6.7 F-250 KR ccsb 4x4
'96 7.3 F-350 Reg Cab 4x4 - bought new.
'04 6.0 E-350 custom 4x4
'08 6.4 F-550 Reg Cab 6 spd 4x4
'17 6.7 F-250 KR ccsb 4x4
Senior User
Joined: Oct 2004
Posts: 436
Likes: 0
Jim-if you read this and haven't sent mine out yet, hang onto it please. I will call tomorrow to combine shipping on a couple more items 
I need to get the 3 hole gage pillar and a pyrometer and boost gage.
What do you guys think Autometer? or Isspro? any others?
I need to get the 3 hole gage pillar and a pyrometer and boost gage.What do you guys think Autometer? or Isspro? any others?
FOREIGN GURU
Joined: Jul 2006
Posts: 7,655
Likes: 7
From: Celaya, Gto. MX
As I understand, Travis was refering to AutoEnginuity and maybe your are refering to AeroForce that is the same thing as Terminator, dont you?
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Thread Starter
|
PREMIUM SPONSOR
Joined: Sep 2003
Posts: 2,630
Likes: 217
From: North East Ohio
Jack, yours went out on Tuesday, but no worries, I'd have to drop ship the pod and gauges to you anyway.
Some have a negative opinion on the Glowshift. I have a set to go into my truck so I can't say first hand what they are like yet, but the pod and both gauges through Glowshift will probably cost less than a pyro from AM or Isspro.
Yup, that's what he meant.
Some have a negative opinion on the Glowshift. I have a set to go into my truck so I can't say first hand what they are like yet, but the pod and both gauges through Glowshift will probably cost less than a pyro from AM or Isspro.
Yup, that's what he meant.
__________________
'96 7.3 F-350 Reg Cab 4x4 - bought new.
'04 6.0 E-350 custom 4x4
'08 6.4 F-550 Reg Cab 6 spd 4x4
'17 6.7 F-250 KR ccsb 4x4
'96 7.3 F-350 Reg Cab 4x4 - bought new.
'04 6.0 E-350 custom 4x4
'08 6.4 F-550 Reg Cab 6 spd 4x4
'17 6.7 F-250 KR ccsb 4x4
FOREIGN GURU
Joined: Jul 2006
Posts: 7,655
Likes: 7
From: Celaya, Gto. MX
ScanGaugeII - Trip Computers + Digital Gauges + Scan Tool
The Aeroforce (interceptor) and the Terminator gauge are the same thing.
sorry.
Post Fiend
Joined: Apr 2004
Posts: 12,835
Likes: 3
From: Silver Lake Dunes, MI
Tim, I have to disagree with you in this. Look here:
ScanGaugeII - Trip Computers + Digital Gauges + Scan Tool
The Aeroforce (interceptor) and the Terminator gauge are the same thing.
sorry.
ScanGaugeII - Trip Computers + Digital Gauges + Scan Tool
The Aeroforce (interceptor) and the Terminator gauge are the same thing.
sorry.
Hotshot
Joined: Jun 2007
Posts: 10,008
Likes: 7
From: Austin, TX
Tim, I have to disagree with you in this. Look here:
ScanGaugeII - Trip Computers + Digital Gauges + Scan Tool
The Aeroforce (interceptor) and the Terminator gauge are the same thing.
sorry.
ScanGaugeII - Trip Computers + Digital Gauges + Scan Tool
The Aeroforce (interceptor) and the Terminator gauge are the same thing.
sorry.
scanguage is the aeroforce interceptor same as the Termy guage, the scanguageII is that little dinky lookin' thing. LoL
Senior User
Joined: Oct 2004
Posts: 436
Likes: 0
......so um "no we agree" means.......you disagree but you.... um agree
ok clear as mud
you just agree to disagree or um.... disagree to agree-Agreed?
Jes havin' a little fun at your expense there Tim
Post Fiend
Joined: Apr 2004
Posts: 12,835
Likes: 3
From: Silver Lake Dunes, MI
