Jan. BS thread.
Senior User
Joined: Jan 2010
Posts: 216
Likes: 0
From: Emerald Coast of Florida
Anyone know the price for a wiring harness in the wrecking yards near Fallon/Reno or the Vegas area? I need to find a dash harness out of a '96 to '98 mustang so that I can get started on my project. Once I get that all I need is sensors and dummy sensors.
I may know where one is in SLC but I don't know if the yard has the car still. Also, any good tuning places in Vegas? If I get this done before our G2G I am going to need to have the computer programed.
I may know where one is in SLC but I don't know if the yard has the car still. Also, any good tuning places in Vegas? If I get this done before our G2G I am going to need to have the computer programed.
There is a place here in Vegas that is just trucks. It's down off Losee Rd.
Las Vegas Truck Salvage:
(702) 649-3111
1900 Losee Rd
North Las Vegas, NV 89030 36.1967 -115.1424
Hotshot
Joined: Dec 2005
Posts: 10,250
Likes: 7,678
From: Chino Valley, Arizona
Anyone know the price for a wiring harness in the wrecking yards near Fallon/Reno or the Vegas area? I need to find a dash harness out of a '96 to '98 mustang so that I can get started on my project. Once I get that all I need is sensors and dummy sensors.
I may know where one is in SLC but I don't know if the yard has the car still. Also, any good tuning places in Vegas? If I get this done before our G2G I am going to need to have the computer programed.
I may know where one is in SLC but I don't know if the yard has the car still. Also, any good tuning places in Vegas? If I get this done before our G2G I am going to need to have the computer programed.
Car-Part.com--Used Auto Parts Market
Post Fiend
Joined: Oct 2003
Posts: 9,176
Likes: 4
From: Western Central NV
Anyone know the price for a wiring harness in the wrecking yards near Fallon/Reno or the Vegas area? I need to find a dash harness out of a '96 to '98 mustang so that I can get started on my project. Once I get that all I need is sensors and dummy sensors.
I may know where one is in SLC but I don't know if the yard has the car still. Also, any good tuning places in Vegas? If I get this done before our G2G I am going to need to have the computer programed.
I may know where one is in SLC but I don't know if the yard has the car still. Also, any good tuning places in Vegas? If I get this done before our G2G I am going to need to have the computer programed.
Jeff go to car-parts.com. There are thousands of wrecking yards listed with most of their parts. I have bought from Trans West in Lehi UT through this sight. They were wonderful plus very fast service & products came as advertised if not better. I see Bart beat me to this info.
Craig
Posting Guru
Joined: Feb 2007
Posts: 1,888
Likes: 0
From: Fallon, NV
Is that why people go to Moundhouse? You guys have been busy. I can't post as much 'cause the main office has everything blocked. It was a nice sunny 82 here today. The Mr was elk hunting out by you Jeff but got fogged out.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread Starter
|
Posting Guru
Joined: Apr 2008
Posts: 1,532
Likes: 1
From: Wendover, NV.
I have used car-part.com before. The results I keep getting in the local area are usually too high or no longer available.
I did go to one for the mustang harness that was priced low. I do not know what car it was for but it was not for a Mustang. The person at the counter kept insisting that it would interchange with the Mustang until I took the gauge cluster out of my dash and showed it to him along with the spare wiring connectors. He changed his story and apologized up down left and right about the mistake. He looked rather young so I think he was just going off what he was told.
I do keep checking the site from time to time just in case. However there is nothing like actually going into the yard to look and pull it yourself. I get some good (as well as crazy) ideas that way.
I did go to one for the mustang harness that was priced low. I do not know what car it was for but it was not for a Mustang. The person at the counter kept insisting that it would interchange with the Mustang until I took the gauge cluster out of my dash and showed it to him along with the spare wiring connectors. He changed his story and apologized up down left and right about the mistake. He looked rather young so I think he was just going off what he was told.
I do keep checking the site from time to time just in case. However there is nothing like actually going into the yard to look and pull it yourself. I get some good (as well as crazy) ideas that way.
Fleet Owner
Joined: Sep 2005
Posts: 28,609
Likes: 18
From: Lake Tahoe, Nevada
There is some inexpensive light industrial property out in Moundhouse.
And access to several of those salvage yards takes you right past some brothels too.
And Jeff, I know what you mean. Some of my more creative thinking takes place while prowling around between the junked cars and trucks!
Senior User
Joined: Jan 2010
Posts: 216
Likes: 0
From: Emerald Coast of Florida
Isn't that the beauty of lurking in a salvage yard as to all the cool old stuff there. Right before my dad passed away we went out and just walked thru a yard that had nothing but antique trucks and it was awesome for both as he got to impart all the cool stories about the old trucks and I got to listen to them!
Flathead Red
Flathead Red
