No topic thread,,, Part 2
FTE Legend
Joined: Oct 2005
Posts: 283,922
Likes: 8,373
From: northwestern Ontario
I'll likely clean up the motor/trans I have and give it a rattle can tune up but won't be able to install it until I get the front cross member and trans cross member. Not that sure how much I'll get done over the winter on this new project but do have a few things to do on the panel to keep me busy.
Lead Driver
Joined: Jun 2011
Posts: 5,510
Likes: 27
From: Winnipeg, Manitoba
I'll likely clean up the motor/trans I have and give it a rattle can tune up but won't be able to install it until I get the front cross member and trans cross member. Not that sure how much I'll get done over the winter on this new project but do have a few things to do on the panel to keep me busy.
Thread Starter
|
Moderator
Joined: Dec 2003
Posts: 97,654
Likes: 2,018
From: Saskatoon, Saskatchewan
I`m stroked! Finally got my old buzz saw to run, a 24'' saw blade on frame with wheels powered by an 8 hp Briggs and Scrap Iron engine that hasn`t run for many yrs. It only took about 20 minutes to cut up enough firewood to fill my F150 for a friend that uses it in his fire place.
Well at least they are on the right track, hopefully next week brings a win. 
Sweet!
I`m lovin` this weather, hopefully it sticks around for a while now. I heard that 2 yrs ago we were shoveling snow. 
Sweet!
Post Fiend
Joined: Aug 2006
Posts: 20,099
Likes: 7
From: Yorkton Sask
Man, yesterday was a beaut, today promises the same... Keep it coming, keep it coming... Got my piles filled yesterday morning, then in the evening got most of the forming done for the grade beam. Those ICF blocks sure make concrete work less labor intensive. Just have to brace them and put in some void form and we're ready for pour #2 on the addition. Momma's happy, I'm happy.
Have a great day everyone!!!
Have a great day everyone!!!
Lead Driver
Joined: Jun 2011
Posts: 5,510
Likes: 27
From: Winnipeg, Manitoba
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Thread Starter
|
Moderator
Joined: Dec 2003
Posts: 97,654
Likes: 2,018
From: Saskatoon, Saskatchewan
Hopefully we all get it for a long while.
What`s the cost of a ICF basement compared to concrete Sherm?
Sounds like the good weather is here for another few days yet, nice to have.
Back at you Grant, have a great day. 
Got my piles filled yesterday morning, then in the evening got most of the forming done for the grade beam. Those ICF blocks sure make concrete work less labor intensive. Just have to brace them and put in some void form and we're ready for pour #2 on the addition. Momma's happy, I'm happy.
Have a great day everyone!!!
Have a great day everyone!!!
FTE Legend
Joined: Oct 2005
Posts: 283,922
Likes: 8,373
From: northwestern Ontario
Great day, put another 350kms on the panel, discovered that the engine doesn't want to run at operating temperature though on the highway.
temp didn't get over 70*C until I started driving around town.
temp didn't get over 70*C until I started driving around town.
Post Fiend
Joined: Aug 2006
Posts: 20,099
Likes: 7
From: Yorkton Sask
Morning fellas, its another beauty out there for now. Yesterday was one of the nicest days of the year in my opinion. The temp was right, windage was right, could have used a few more daylight hours but we survived...
I've always found basements to be broken into 3rds. PWF (wood) is the cheapest, then standard form pour concrete is roughly twice the cost of PWF, ICF is three times the price of PWF. Basically the cost of the blocks are the only thing making the ICF basements more money than standard form pour. I've done a few basements and grade beams with ICF. If you're smart, they're a license to print money.
I'm just doing a 2' grade beam on piles here, so a short crawl space under the addition.
Thanks Gerry. I'm hoping that the hardest part of the project was drilling the holes and getting around the rocks...
I've always found basements to be broken into 3rds. PWF (wood) is the cheapest, then standard form pour concrete is roughly twice the cost of PWF, ICF is three times the price of PWF. Basically the cost of the blocks are the only thing making the ICF basements more money than standard form pour. I've done a few basements and grade beams with ICF. If you're smart, they're a license to print money.
I'm just doing a 2' grade beam on piles here, so a short crawl space under the addition.
Thanks Gerry. I'm hoping that the hardest part of the project was drilling the holes and getting around the rocks...