When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Finally someone has invented a way to grease that Dang'd muffler bearing that I've been hearing about for so many years, but could never find!!! POP, very nice! YOU DA-MAN!!! AHHHH Can I borrow it? Thanks for your help too...Country
Are you talking about the big bearing that "sealed" and "non greaseable" or the needle bearing? If its for the sealed one(if Im understand correctly) im willing to buy one, I had 4 good ones a year ago, im down to 2 that are on the truck, and one is starting to become bad now!
Let me get the drawing in hand and see if I can break into a lathe or a CNC center at work and I will try to get a few made up. It doesn't look like it would be too hard to machine. If I can get a few made up I will give them away.
Scott If I knew where to get the Bow down Eomoticons Guys, I'd put it here and now in your Honor!! But I'm sure your time is worth something, and I too would be willing to pay for one also. Thanks Par'd. Country
I could never take money from anyone here for anything. If I can get them made up and I can get enough made up I will give them away. We are in sweeps month right now at work (last month of the fiscal year) and machine time is very tight but there are some tricks to getting things done sometimes.
Last edited by Texas Outlaw; 08-12-2007 at 08:50 PM.
Are you talking about the big bearing that "sealed" and "non greaseable" or the needle bearing? If its for the sealed one(if Im understand correctly) im willing to buy one, I had 4 good ones a year ago, im down to 2 that are on the truck, and one is starting to become bad now!
Pop, if I understand you right, you built the fitting out of the old ABS sensor, is that right? Just drilled it out or what?
I know I have an old ABS sensor somewhere..............