When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Check the connector at the cruise deactivator switch, located on the master cylinder. It should have battery power on the LG/RD wire in RUN via F11 in the underdash fuse panel.
Deactivator switch is a normally closed switch. If the circuit is open, the cruise is disabled.
Steve thank you for your help, I will check those connetions. Do you know if the computer would have that parameter burn out if the performance chip wasnt correct?