Question on shackle bracket replacement

Reply Subscribe

Thread Tools

Search this Thread

Jul 16, 2004 | 08:41 AM

blacksmithtech

Thread Starter

Junior User

Joined: Jun 2004

Posts: 57

Likes: 0

Question on shackle bracket replacement

Hi FTE members, I have a new guy question about the "shackle flip" idea. I have a 90 F150 4x2. I need to replace the rear leaf brackets/hangers because they are rotted out. Can I use a set of front leaf brackets (part riveted to frame on the front of the leaf) on the shackle end (rear) of the leaf and a F450 shackle (beefier) in compression. This would seem to give a modest lift and allow the ability to carry loads. Any ideas from the "been there/done that" crowd are very welcome. Thanks to all for the great ideas at this site - I learn something new everytime I visit!

Jul 16, 2004 | 12:38 PM

mark a.

Lead Driver

Joined: Mar 2004

Posts: 8,924

Likes: 153

The front hanger uses a bigger through bolt,which will not pass through the rear shackle bushing.

Jul 16, 2004 | 01:21 PM

95-F-350-4x4

Posting Guru

Joined: Feb 2004

Posts: 1,066

Likes: 0

From: Chatsworth, CA

I would just buy the shackle flip from sky-manufacturing for $119.95. It comes with all the hardware you need just paint it. they are real beefy hangers too.