When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Congrats. Mine is still traveling the USA on rail. Try the fuse box for tbe code. The manual should have a piece if paper with it if they still do hard manuals. Forscan should also be able to show it.
Other than filling the cabinets in the pole barn with things like oil, oil filters, fuel filters and Archoil 6500, I've also ordered the following:
RetraxPRO MX retractable tonneau cover
Bedrug XLT bedmat
Weathertech No-Drill mud flaps
Fumto F106N
Cravenspeed stubby antenna
This stuff is pretty much the exact same stuff I order for every new truck. I've tried a variety of tonneaus as well as Leer XQ and ARE Z-series toppers over the years, but I'm going back to the RetraxPRO MX again.
I still have to order some floor mats. I usually get the Husky x-Act Contours, but I'm thinking of going with the TuxMat floor mats this time around. We shall see.
Picked mine up Monday. So far so great! No issues. Ordered some floor mats and Carhart relaxed fit seat covers. Hope they fit. I just want to put them in for hunting and then take them back out. Also retrieved my factory door code so I could set my door code. The factory key code was not on the BCM and was not in any paperwork or on any stickers that the dealer could find. So we had to do the two fob thing. (Put first fob on fob slot, turn on (not start) then off within two seconds or so, quickly place second fob on slot, turn on, wait for code to appear on dash). Also programmed the garage door opener. Just to walk in, because it won't fit in garage, of course.
The factory key code was not on the BCM and was not in any paperwork or on any stickers that the dealer could find.
Time to learn your dealer that they don't do either of those anymore. Yes, the key fob thing works, but my dealer had an OBDII device he plugged in and had the code fairly quickly. Not sure if it was a Ford/dealer app or some generic OBDII app.
I have to say that I absolutely LOVE the Argon Blue on the new trucks. I really wish Ford would have had it, or at least a similar blue, when I ordered my 24. I do love my Rapid Red, but man I kinda wish it was Argon Blue. My last truck was an 03 F250 that I ordered in Sonic Blue and my 13 Shelby is Deep Impact Blue so I am pretty partial to blue. I've not seen an Argon Blue in person, but from the pics I've seen it does look fairly close to my Deep Impact Blue.
Added my 50 gallon auxiliary fuel tank and wired it to my upfitter #6 and installed my toolbox. I also installed the (dealer installed) light up front emblem. I was impatient and didn’t want to bring it back to have it done and I also didn’t want some kid at the dealer doing it. Esp after the salesmen said “they’ve never installed one before”. It’s the same putco light I had on my 17 so it wasn’t to bad. I’ll post pics tomorrow. I forgot to take some.
