When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello. I have a Holman Moody 2x4 intake and cannot find any numbers on it. It just has the HM stamp between the carbs. Can anyone tell me how to identify and possibly how much its worth? Greatly Appreciated!
Those carburetors could easily be recolored and rebuilt to look as good as new. A couple of years ago I built a 427 for a customer. He had a 1963 engine with a '63 intake and the '65 and later carburetors like your intake. He wanted fuel injection so we used the intake manifold with a dual Fitech setup. He sold the carburetors to somebody for about $1500 I think.
66, it looks just like my C7ZX manifold. I believe they wee cast by Buddy Bar. Ford, H-M, Shelby and others sold them over the counter. Dual plane, dual 4 barrel, medium riser port size. Its a nice intake. Do you have the vacuum balance for the secondaries ? Some have had trouble with this intake by trying to run generic Holleys on top. But your Holleys can be recalibrated if they aren't already spot on. DinosaurFan
66, it looks just like my C7ZX manifold. I believe they wee cast by Buddy Bar. Ford, H-M, Shelby and others sold them over the counter. Dual plane, dual 4 barrel, medium riser port size. Its a nice intake. Do you have the vacuum balance for the secondaries ? Some have had trouble with this intake by trying to run generic Holleys on top. But your Holleys can be recalibrated if they aren't already spot on. DinosaurFan
Thanks Dinosaur. I'll have to look and see if I have that vacuum balance in my dad's old shop. Appreciate the info!
66, see the small nipples that are covered on each of the vacuum diaphram covers ? there should be a vacuum line that goes between them, to balance the secondary throttles. DF
66, see the small nipples that are covered on each of the vacuum diaphram covers ? there should be a vacuum line that goes between them, to balance the secondary throttles. DF
ITs at my mom's place so next time im there I'll definitely take a look at it. Thanks for the info!
That's a medium riser 427 intake with the carburetors, linkage and fuel log.. That's a VERY nice piece that would be worth a lot to the right person.
Does anyone know what happened to this intake manifold, long time back! Or if the is an HM 427 twin carb intake manifold anywhere, i would be very interested in purchasing one for my Galaxie R Code
Brandon Beckler in Dittmer MO and his uncle have a hobby side business where they buy and sell used intake manifolds, mostly for Fords. They have had some 427 parts come through there from time to time so it might be worth contacting them and see. I believe he has accounts on Facebook where he can be contacted.
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Slideshow: Called the Fortress, the 850-horsepower pickup combines Raptor underpinnings with military-inspired features, survival equipment, and a starting price of $285,000.
its a Buddy Bar, I think
