Electrical no start! What a headache
Thread Starter
|
New User
Joined: Jun 2020
Posts: 2
Likes: 0
Electrical no start! What a headache
Hello everyone, I have a 00 x I just bought, v10 4wd. Replaced steering tube now it won’t start.
replaced neutral safety switch tumbler and checked all fuses and relays. Oh and the solenoid. I can start it through the solenoid but not the ignition
anyone have any ideas what I could check next?
thanks in advance
replaced neutral safety switch tumbler and checked all fuses and relays. Oh and the solenoid. I can start it through the solenoid but not the ignition
anyone have any ideas what I could check next?
thanks in advance
Hotshot
Joined: Jan 2004
Posts: 19,762
Likes: 1,079
From: St Louis
Assuming it started correctly before the recent repair, it's still an inescapable conclusion that the new fault is a result of that repair activity. That is, something ain't right now.
Go read this thread in its entirety. It includes the schematic as well as additional information on how to diagnose. The circuit is identical to yours.
https://www.ford-trucks.com/forums/1...-no-click.html
Go read this thread in its entirety. It includes the schematic as well as additional information on how to diagnose. The circuit is identical to yours.
https://www.ford-trucks.com/forums/1...-no-click.html
Thread
Thread Starter
Forum
Replies
Last Post
bub80z28
1987 - 1996 F150 & Larger F-Series Trucks
10
Apr 7, 2014 08:49 AM
HeathJohnson
Modular V10 (6.8l)
61
Feb 26, 2007 04:05 PM
