power window not working
Posting Guru
Joined: May 2015
Posts: 2,036
Likes: 5
Wear gloves before you pull too hard, had many a bulbs break in my hands and it's not fun picking all the glass out of your fingers.
Sometimes I take a pair of needle nose, while looking in a safe direction go ahead and break the bulb part, then grab the metal part of it and pull away.
Sometimes I take a pair of needle nose, while looking in a safe direction go ahead and break the bulb part, then grab the metal part of it and pull away.
Logistics Pro
Joined: Jun 2017
Posts: 3,952
Likes: 509
From: Edmond, OK
I changed one of those bulbs and it broke. I had to use pliers to pull the remnants out of the socket. You might try doushing it really good with electronics cleaner for a few days in a row. Some bulbs have dielectric grease in the socket from the factory and it gums up and solidifies after 30+ years. Good luck. 
Thread
Thread Starter
Forum
Replies
Last Post
RenoHuskerDu
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
2
May 4, 2018 10:30 PM
greyfox503
1997 - 2006 Expedition & Navigator
3
Feb 17, 2008 09:55 AM
